Dual Intelligent High-current Self-protected Silicon High Side Switch (8.0m廓)

The 33988 is a dual self-protected 8.0 mΩ silicon switch used to replace electromechanical relays, fuses and discrete devices in power management applications. The 33988 is designed for harsh environment and includes self-recovery features. The device is suitable for loads with high inrush current

文件：1.10049 Mbytes 页数：34 Pages

freescaleFreescale Semiconductor, Inc

飞思卡尔飞思卡尔半导体

Dual Intelligent High-current Self-protected Silicon High Side Switch (8.0m廓)

The 33988 is a dual self-protected 8.0 mΩ silicon switch used to replace electromechanical relays, fuses and discrete devices in power management applications. The 33988 is designed for harsh environment and includes self-recovery features. The device is suitable for loads with high inrush current

文件：1.10049 Mbytes 页数：34 Pages

freescaleFreescale Semiconductor, Inc

飞思卡尔飞思卡尔半导体

Dual Intelligent High-current Self-protected Silicon High Side Switch (8.0 mOhm)

文件：919.15 Kbytes 页数：34 Pages

freescaleFreescale Semiconductor, Inc

飞思卡尔飞思卡尔半导体

High-Side Switch, 12V, Dual 8mOhms, PQFN 16

The NXP® 12XS2 eXtreme switch family consists of very low RDSON devices in single or dual high side configuration to replace electromechanical relays or discrete devices in power management applications and DC motor control. \nDesigned for harsh environments and includes self-recovery features\nSuit MC33981• Operating voltage range from 6.0 V to 27 V, with sleep current < 5.0 μA, extended mode down to 4.5V\n• 40 A continuous current capability\n• PWM capability up to 60 kHz, with a duty cycle from 5% to 100%\n• Slew-rate control with an external capacitor\n• Overcurrent and overtemperat;

恩XP

恩智浦

Dual Intelligent High-current Self-protected Silicon High Side Switch (8.0mΩ)

The 33988 is a dual self-protected 8.0mΩ silicon switch used to replace electromechanical relays, fuses, and discrete devices in power management applications. The 33988 is designed for harsh environments, and it includes self-recovery features. The device is suitable for loads with high inrush curr • Dual 8.0mΩ max high side switch with parallel input or SPI control\n• 6.0V to 27V operating voltage with standby currents < 5.0μA\n• Output current monitoring with two SPI-selectable current ratios\n• SPI control of over-current limit, over-current fault blanking time, output-OFF open load detecti;

恩XP

恩智浦