MC33883HEG数据手册恩XP中文资料规格书

描述 Description

The NXP® MC33883 is an H-bridge gate driver (also known as a full-bridge pre-driver) IC with integrated charge pump and independent high and low side gate driver channels.
The gate driver channels are independently controlled by four separate input pins, allowing the device to be optionally configured as two independent high side gate drivers and two independent low side gate drivers
The low side channels are referenced to ground. The high side channels are floating
The gate driver outputs can source and sink up to 1.0 A peak current pulses, permitting large gate-charge MOSFETs to be driven and/or high pulse-width modulation frequencies
Linear regulator providing a 15V typical gate supply

特性 Features

• VCC operating voltage range from 5.5 V up to 55 V
• VCC2 operating voltage range from 5.5 V up to 28 V
• CMOS / LSTTL compatible I / O
• 1.0 A peak gate driver current
• Built-in high side charge pump
• Under-voltage lockout (UVLO)
• Over-voltage lockout (OVLO)
• Global enable with