The MC14046B phase locked loop contains two phase comparators, a voltage−controlled oscillator (VCO), source follower, and zener diode. The comparators have two common signal inputs, PCAin and PCBin. Input PCAin can be used directly coupled to large voltage signals, or indirectly coupled (with a series capacitor) to small voltage signals. The self−bias circuit adjusts small voltage signals in the linear region of the amplifier. Phase comparator 1 (an exclusive OR gate) provides a digital error signal PC1out, and maintains 90° phase shift at the center frequency between PCAin and PCBin signals (both at 50 duty cycle). Phase comparator 2 (with leading edge sensing logic) provides digital error signals, PC2out and LD, and maintains a 0° phase shift between PCAin and PCBin signals (duty cycle is immaterial). The linear VCO produces an output signal VCOout whose frequency is determined by the voltage of input VCOin and the capacitor and resistors connected to pins C1A, C1B, R1, and R2. The source−follower output SFout with an external resistor is used where the VCOin signal is needed but no loading can be tolerated. The inhibit input Inh, when high, disables the VCO and source follower to minimize standby power consumption. The zener diode can be used to assist in power supply regulation.

Applications include FM and FSK modulation and demodulation, frequency synthesis and multiplication, frequency discrimination, tone decoding, data synchronization and conditioning, voltage−to−frequency conversion and motor speed control.

Features

• Buffered Outputs Compatible with MHTL and Low−Power TTL

• Diode Protection on All Inputs

• Supply Voltage Range = 3.0 to 18 V

• Pin−for−Pin Replacement for CD4046B

• Phase Comparator 1 is an Exclusive OR Gate and is Duty Cycle Limited

• Phase Comparator 2 Switches on Rising Edges and is not Duty Cycle Limited

• Pb−Free Packages are Available*

MC14046BDWR2G属于集成电路（IC） > 时钟发生器，PLL，频率合成器。安森美半导体公司制造生产的MC14046BDWR2G时钟发生器，PLL，频率合成器时钟发生器、PLL 和频率合成器集成电路 (IC) 可为逻辑器件提供参考信号的稳定定时脉冲，这些器件包括计算机、微控制器、数据通信系统和图形/视频发生器。这些集成电路可能包括缓冲器、驱动器、分频器、倍频器、多路复用器、合成器、扇出分配器和预分频器。