Description

The EP16VA is a world−class differential receiver/driver. The device is functionally equivalent to the EP16 and LVEP16 devices but with high gain output. QHG and QHG outputs have a DC gain several times larger than the DC gain of an EP16.

The VBB pin, an internally generated voltage supply, is available to this device only. For single-ended input conditions, the unused differential input is connected to VBB as a switching reference voltage. VBB may also rebias AC coupled inputs. When used, decouple VBB and VCC via a 0.01 F capacitor and limit current sourcing or sinking to 0.5 mA. When not used, VBB should be left open. Under open input conditions (pulled to VEE) internal input clamps will force the QHG output LOW.

Special considerations are required for differential inputs under No Signal conditions to prevent instability. The 100 Series contains temperature compensation.

Features

• 270 ps Typical Propagation Delay

• Gain > 20

• 20 mV Minimum Input Voltage Swing

• Maximum Frequency > 3 GHz Typical

• PECL Mode Operating Range: VCC = 3.0 V to 5.5 V with VEE = 0 V

• NECL Mode Operating Range: VCC = 0 V with VEE = −3.0 V to −5.5 V

• Open Input Default State

• VBB Output

• Pb−Free Packages are Available

MC10EP16VADTR2属于集成电路（IC） > 专用逻辑器件。安森美半导体公司制造生产的MC10EP16VADTR2专用逻辑器件专用逻辑 IC 设计提供应用特定的逻辑输出类型，例如 BCD 速率倍增、可寻址扫描端口、总线终端阵列、CML 驱动器、比较器、ABT 扫描测试、二进制全加法器、互补对加逆变器、可配置缓冲器、触点颤动消除器、晶体振荡器、延迟元件、差分接收器、LVTTL 到 GTLP 收发器、存储器解码器、电源良好检测器和分频器。