MC100EL15数据手册集成电路（IC）的时钟缓冲器驱动器规格书PDF

描述 Description

The MC10EL/100EL15 is a low skew 1:4 clock distribution chip designed explicitly for low skew clock distribution applications. The device can be driven by either a differential or single-ended ECL or, if positive power supplies are used, PECL input signal. If a single-ended input is to be used the VBB output should be connected to the CLK input and bypassed to ground via a 0.01 F capacitor. The VBB output is designed to act as the switching reference for the input of the EL15 under single-ended input conditions, as a result this pin can only source/sink up to 0.5mA of current. The EL15 features a multiplexed clock input to allow for the distribution of a lower speed scan or test clock along with the high speed system clock. When LOW (or left open and pulled LOW by the input pulldown resistor) the SEL pin will select the differential clock input. The common enable (ENbar) is synchronous so that the outputs will only be enabled/disabled when they are already in the LOW state. This avoids any chance of generating a runt clock pulse when the device is enabled/disabled as can happen with an asynchronous control. The internal flip flop is clocked on the falling edge of the input clock, therefore all associated specification limits are referenced to the negative edge of the clock input.The 100 series contains temperature compensation.

特性 Features

• 50ps Output-to-Output Skew
• Synchronous Enable/Disable
• Multiplexed Clock Input
• ESD Protection: > 1 KV HBM, > 100 V MM
• PECL Mode Operating Range: VCC = 4.2 V to 5.7 V with VEE = 0 V
• NECL Mode Operating Range: VCC = 0 V with VEE = -4.2 V to -5.7 V
• Internal Input Pulldown Resistors on CLKs, SCLK, SEL, and ENbar.
• Meets or Exceeds JEDEC Spec EIA/JESD78 IC Latchup Test
• Moisture Sensitivity Level 1For Additional Information, see Application Note AND8003/D
• Flammability Rating: UL-94 code V-0 @ 1/8\", Oxygen Index 28 to 34
• Transistor Count = 103 devices
• Pb-Free Packages are Available

简介

MC100EL15属于集成电路（IC）的时钟缓冲器驱动器。由制造生产的MC100EL15时钟缓冲器，驱动器时钟缓冲器和驱动器集成电路产品族中的产品用于帮助信号在系统中传输，常用作频率/时间参考信号，以同步系统内的活动。尽管这些器件最常用到的功能就是缓冲（即，为使信号不受驱动负载的影响而从某个信号源复制信号），但是该产品族中的某些器件还能执行其他功能，例如选择性改变缓冲信号路径、按某个整数值分割信号频率，或进行所用电信号格式转换。