Description

The 32-bit Direct Rambus RIMM module is a generalpurpose high-performance lines of memory modules suitable for use in a broad range of applications including computer memory, personal computers, workstations, and other applications where high bandwidth and latency are required.

The 32-bit RIMM module consists of 288Mb Direct Rambus DRAM (Direct RDRAM) devices. These are extremely high-speed CMOS DRAMs organized as 16M words by 18 bits. The use of Rambus Signaling Level (RSL) technology permits the use of conventional system and board design technologies. The 32-bit RIMM modules support 800MHz transfer rate per pin, resulting in total module bandwidth of 3.2GB/s.

Features

• 256MB Direct RDRAM storage and 256 banks total on module

• 2 independent Direct RDRAM channels, 1 pass through and 1 terminated on 32-bit RIMM module

• High speed 800MHz Direct RDRAM devices

• 232 edge connector pads with 1mm pad spacing

- Module PCB size: 133.35mm × 39.925mm × 1.27mm

- Gold plated edge connector pads contacts

• Serial Presence Detect (SPD) support

• Operates from a 2.5V (±5) supply

• Low power and power down self refresh modes

• Separate Row and Column buses for higher

efficiency