MBI5037数据手册Macroblock中文资料规格书

描述 Description

MBI5037 is an enhanced 16-channel constant current LED sink driver with advanced error detection functions and smart power-saving modes. MBI5037 succeeds MBI5026 and also exploits PrecisionDrive™ technology to enhance its output characteristics. Furthermore, MBI5037 uses the concept of Share-I-O™ technology to make MBI5037 package compatible with MBI5026 and extend its advanced functions, such as silent LED open circuit detection, silent LED short detection, leakage diagnosis, and temperature warning. With the Share-I-O™ technique, the printed circuit board originally designed for MBI5026 may be also applicable to MBI5037, if the /OE is controllable. In addition, MBI5037 features two power saving modes: sleep mode and 0-Power mode to increase the power efficiency. Therefore, MBI5037 is especially suitable for LED traffic sign and message sign applications.

MBI5037 provides “compulsory silent error detection”. Once the dedicated command is issued, all of the current output ports will be turned on in about 700ns interval with small current. The image will not be impacted since the turn-on duration and current are so small. MBI5037 may detect all of the current output ports and report the LED error status without comparing original data. Moreover, the settable threshold voltages for short-circuit detection and leakage diagnosis may comply with the variation of different LED forward voltage. Additionally, to ensure the system reliability, MBI5037 is built with thermal error flag to prevent IC from over temperature (160°C).

MBI5037 also features two power saving modes: sleep mode and 0-Power mode. Both modes reduce the supply current of MBI5037 to 200uA to save the power. Flexible for different applications, sleep mode can be issued by command, while 0-power mode is automatically activated when all the output data are 0. For the power saving purposes, MBI5037 is especially designed to save the supply current of LED drivers when most LEDs on LED traffic signs and message signs are usually turned off.

MBI5037 contains a 16-bit shift register and a 16-bit output latch, which convert serial input data into parallel output format. At MBI5037 output stages, sixteen regulated current output ports are designed to provide uniform and constant current sinks with small current variation between current output ports for driving LEDs within a wide range of forward voltage (VF) variations. Users may adjust the output current from 3mA to 80mA with an external resistor Rext, which gives users flexibility in controlling the light intensity of LEDs. MBI5037 guarantees to endure maximum 17V at the output ports. Besides, the high clock frequency up to 30MHz also satisfies the system requirements of high-volume data transmission.

特性 Features

·01 No. of Output Channel ：16
·02 Max. Sustaining Voltage ：17V
·03 Constant Output Current Per Channel ：\"5~80mA@ 5V supply voltage; 3~60mA@ 3.3V supply voltage \"
·04 Max. Clock Frequency ：30MHz
·05 Output Current Accuracy-between channels ： <±1.5% (typ.)
·06 Output Current Accuracy-between ICs ： <±3% (typ.)
·07 Fast Response of Output Current,/OE (min.) ：50ns (VDD=5V, IOUT=20mA)
·08 Supply Voltage ：3.0~5.5V
·09 Error Detection ：Compulsory error detection - Data-independent full panel detection - Error detection current: small current during 700ns - Individual LED open- and short-circuit detection - Leakage and short to ground diagnosis - Pre-settable threshold voltage for short-circuit detection and leakage diagnosis - Thermal protection
·10 Thermal Detection ：YES
·11 Thermal Protection ：YES
·12 Constant Output Current Invariant to Load Voltage Change ：YES
·13 Schmitt Trigger Input ：YES
·14 Staggered Delay of Output ：YES
·15 RoHS Compliant Package ：SOP24L/SSOP24L
·16 Other Specification ：Power saving modes to save supply current of LED driver   - Sleep mode and 0-Power mode
·17 Technology ：Share-I-O™ /PricisionDrive™
·18 Applications ：交通显示屏/ VMS
·19 Major Feature ：Error Detection