MB90F828BPMC中文资料富士通数据手册PDF规格书

■ DESCRIPTION

The MB90820B series is a line of general-purpose, Fujitsu 16-bit microcontrollers designed for process control applications which require high-speed real-time processing, such as consumer products.

While inheriting the AT architecture of the F2MC family, the instruction set for the F2MC-16LX CPU core of the MB90820B series incorporates additional instructions for high-level languages, supports extended addressing modes, and contains enhanced multiplication and division instructions as well as a substantial collection of improved bit manipulation instructions. In addition, the MB90820B series has an on-chip 32-bit accumulator which enables processing of long-word data.

The peripheral resources integrated in the MB90820B series include : an 8/10-bit A/D converter, 8-bit D/A converters, UARTs (SCI) 0, 1, multi-functional timer (16-bit free-run timer, input capture units (ICUs) 0 to 3, output compare units (OCUs) 0 to 5, 16-bit PPG timer 0, waveform generator), 16-bit PPG timer 1, 2, PWC 0, 1, 16-bit reload timer 0, 1 and DTP/external interrupt.

■ FEATURES

• Minimum execution time of instruction : 42 ns / 4 MHz oscillation (uses PLL clock multiplication) maximum multiplier = 6

• Maximum memory space 16 M bytes, Linear/bank access

• Instruction set optimized for controller applications

Supported data types : bit, byte, word, and long-word types

Standard addressing modes : 23 types

32-bit accumulator enhancing high-precision operations

Signed multiplication/division instructions and enhanced RETI instructions

• Enhanced high level language (C) and multi-tasking support instructions

Use of a system stack pointer

Symmetrical instruction set and barrel shift instructions

• Program patch function (for two address pointers)

• Increased execution speed : 4-byte instruction queue

• Powerful interrupt function

Up to eight priority levels programmable

External interrupt inputs : 8 channels

• Automatic data transmission function independent of CPU operation

Up to 16 channels for the extended intelligent I/O service

DTP request inputs : 8 channels

• Internal ROM

Flash memory : 64 K/128 K bytes with flash security

MASK ROM : 64 K/128 K bytes

• Internal RAM

Evaluation product : 16 K bytes

Flash memory : 4 K/8 K bytes

MASK ROM : 4 K bytes

• General-purpose ports

Up to 66 channels (ports where pull-up resistor can be configured : 32 channels)

• A/D Converter (RC) : 16 channels

8/10-bit resolution selectable

Conversion time : Min 3 µs (24 MHz operation, including sampling time)

• 8-bit D/A Converter : 2 channels

• UART : 2 channels

• 16-bit PPG timer : 3 channels

Mode switching function provided (PWM mode or one-shot mode)

ch.0 can be worked with multi-functional timer or independently

• 16-bit reload timer : 2 channels

• 16-bit PWC timer : 2 channels

• Clock supervisor

• Multi-functional timer

Input capture : 4 channels

Output compare with selectable buffer : 6 channels

Free-run timer with up or up-down mode selection and selectable buffer: 1 channel

16-bit PPG timer : 1 channel

Waveform generator : (16-bit timer : 3 channels, 3-phase waveform or dead time)

• Time-base timer/watchdog timer : 18-bit

• Low-power consumption mode :

Sleep mode

Stop mode

CPU intermittent operation mode

• Package :

LQFP-80 (FPT-80P-M21 : 0.50 mm pitch)

LQFP-80 (FPT-80P-M22 : 0.65 mm pitch)

QFP-80 (FPT-80P-M06 : 0.80 mm pitch)

• CMOS technology