MB90428GA中文资料PDF规格书
MB90428GA规格书详情
■ DESCRIPTIONS
The FUJITSU MB90420G/5G (A) Series is a 16-bit general purpose high-capacity microcontroller designed for vehicle meter control applications etc.
The instruction set retains the same AT architecture as the FUJITSU original F2MC-8L and F2MC-16L series, with further refinements including high-level language instructions, expanded addressing mode, enhanced (signed) multipler-divider computation and bit processing.
In addition, A 32-bit accumulator is built in to enable long word processing.
■ FEATURES
• 16-bit input capture (4 channels)
Detects rising, falling, or both edges.
16-bit capture register × 4
Pin input edge detection latches the 16-bit free-run timer counter value, and generates an interrupt request.
• 16-bit reload timer (2 channels)
16-bit reload timer operation (select toggle output or one-shot output)
Event count function selection provided
• Clock timer (main clock)
Operates directly from oscillator clock.
Compensates for oscillator deviation
Read/write enabled second/minute/hour register Signal interrupt
• 16-bit PPG (3 channels)
Output pins (3) , external trigger input pin (1)
Output clock frequencies : fCP, fCP/22, fCP/24, fCP/26
• Delay interrupt
Generates interrupt for task switching.
Interruptions to CPU can be generated/deleted by software setting.
• External interrupts (8 channels)
8-channel independent operation
Interrupt source setting available : “L” to “H” edge/ “H” to “L” edge/ “L” level/ “H” level.
• A/D converter
10-bit or 8-bit resolution × 8 channels (input multiplexed)
Conversion time : 6.13 µs or less (at fCP = 16 MHz)
External trigger startup available (P50/INT0/ADTG)
Internal timer startup available (16-bit reload timer 1)
• UART (2 channels)
Full duplex double buffer type
Supports asynchronous/synchronous transfer (with start/stop bits)
Internal timer can be selected as clock (16-bit reload timer 0)
Asynchronous : 4808 bps, 5208 bps, 9615 bps, 10417 bps, 19230 bps, 38460 bps, 62500 bps, 500000 bps
Synchronous : 500 Kbps, 1Mbps, 2Mbps (at fCP = 16 MHz)
• CAN interface *1
Conforms to CAN specifications version 2.0 Part A and B.
Automatic resend in case of error.
Automatic transfer in response to remote frame.
16 prioritized message buffers for data and messages for data and ID
Multiple message support
Receiving filter has flexible configuration : All bit compare/all bit mask/two partial bit masks
Supports up to 1 Mbps CAN WAKEUP function (connects RX internally to INT0)
• LCD controller/driver (1 channel)
Segment driver and command driver with direct LCD panel (display) drive capability
• Low voltage/Program Looping detect reset *2
Automatic reset when low voltage is detected
Program Looping detection function
• Stepping motor controller (4 channels)
High current output for all channels × 4
Synchronized 8/10-bit PWM for all channels × 2
• Sound generator
8-bit PWM signal mixed with tone frequency from 8-bit reload counter.
PWM frequencies : 62.5 kHz, 31.2 kHz, 15.6 kHz, 7.8 kHz (at fCP = 16MHz)
Tone frequencies : 1/2 PWM frequency, divided by (reload frequency +1)
产品属性
- 型号:
MB90428GA
- 制造商:
FUJITSU
- 制造商全称:
Fujitsu Component Limited.
- 功能描述:
16-Bit Original Microcontroller
供应商 | 型号 | 品牌 | 批号 | 封装 | 库存 | 备注 | 价格 |
---|---|---|---|---|---|---|---|
FUJITSU/富士通 |
23+ |
QFP |
50000 |
全新原装正品现货,支持订货 |
询价 | ||
CYPRESS(赛普拉斯) |
23+ |
LQFP100(14x14) |
6000 |
诚信服务,绝对原装原盘 |
询价 | ||
Fuji/FUJI CORPORATION/株式会社 |
21+ |
TQFP100 |
2073 |
优势代理渠道,原装正品,可全系列订货开增值税票 |
询价 | ||
FUJITSU/富士通 |
23+ |
NA/ |
500 |
优势代理渠道,原装正品,可全系列订货开增值税票 |
询价 | ||
CYPRESS(赛普拉斯) |
23+ |
BQFP100 |
7350 |
现货供应,当天可交货!免费送样,原厂技术支持!!! |
询价 | ||
FUJI |
2020+ |
TQFP100 |
80000 |
只做自己库存,全新原装进口正品假一赔百,可开13%增 |
询价 | ||
- |
22+ |
100-LQFP14x14 |
3000 |
一级代理原厂VIP渠道,专注军工、汽车、医疗、工业、 |
询价 | ||
23+ |
N/A |
59000 |
一级代理放心采购 |
询价 | |||
Cypress |
21+ |
25000 |
原厂原包 深圳现货 主打品牌 假一赔百 可开票! |
询价 | |||
CypressSemiconductorCorp |
18+ |
100-LQFP |
8500 |
MCU专业供应商! |
询价 |