■ FEATURES

• Power supply voltage of 2.7 to 3.6 V

• High performance

100 ns maximum access time

• Operating Temperature –20 to +85°C

— FLASH MEMORY

• Minimum 100,000 write/erase cycles

• Sector erase architecture

One 16 K byte, two 8 K bytes, one 32 K byte, and fifteen 64 K bytes.

Any combination of sectors can be concurrently erased. Also supports full chip erase.

• Boot Code Sector Architecture

MB84VA2002: Top sector

MB84VA2003: Bottom sector

• Embedded EraseTM Algorithms Automatically pre-programs and erases the chip or any sector

• Embedded ProgramTM Algorithms Automatically writes and verifies data at specified address

• Data Polling and Toggle Bit feature for detection of program or erase cycle completion

• Ready-Busy output (RY/BY) Hardware method for detection of program or erase cycle completion

• Automatic sleep mode When addresses remain stable, automatically switch themselves to low power mode.

• Low VCC write inhibit ≤ 2.5 V

• Erase Suspend/Resume Suspends the erase operation to allow a read in another sector within the same device

• Please refer to MBM29LV800TA/BA data sheet in detailed function

— SRAM

• Power dissipation

Operating : 35 mA max.

Standby : 50 µA max.

• Power down features using CE1s and CE2s

• Data retention supply voltage: 2.0 V to 3.6 V