1.0 GHz band Low Power I/Q Modulator For Direct Conversion

■DESCRIPTION The MB54608L/B is an I/Q Modulator for direct conversion method, and is used for up to 1.0 GHz band digital cellular phones such as GSM, PDC and so on. MB54608L consists of a frequency doubler, a Flip-flop type quadrature phase shifter, I/Q modulator and a mixer for frequency

文件：160.14 Kbytes 页数：15 Pages

Fujitsu

富士通

1.0 GHz band Low Power I/Q Modulator For Direct Conversion

■DESCRIPTION The MB54608L/B is an I/Q Modulator for direct conversion method, and is used for up to 1.0 GHz band digital cellular phones such as GSM, PDC and so on. MB54608L consists of a frequency doubler, a Flip-flop type quadrature phase shifter, I/Q modulator and a mixer for frequency

文件：160.14 Kbytes 页数：15 Pages

Fujitsu

富士通

1.0 GHz band Low Power I/Q Modulator For Direct Conversion

■DESCRIPTION The MB54608L/B is an I/Q Modulator for direct conversion method, and is used for up to 1.0 GHz band digital cellular phones such as GSM, PDC and so on. MB54608L consists of a frequency doubler, a Flip-flop type quadrature phase shifter, I/Q modulator and a mixer for frequency

文件：160.14 Kbytes 页数：15 Pages

Fujitsu

富士通

1.0 GHz band Low Power I/Q Modulator For Direct Conversion

■DESCRIPTION\nThe MB54608L/B is an I/Q Modulator for direct conversion method, and is used for up to 1.0 GHz band digital\ncellular phones such as GSM, PDC and so on.\nMB54608L consists of a frequency doubler, a Flip-flop type quadrature phase shifter, I/Q modulator and a mixer for frequency offset • Supporting GSM frequency band Output frequency: 1.0 GHz (max.) Output power: –4 dBm(Typical, VBB= 1.0 Vp-p input)\n• Low voltage operation: VCC= 2.6 V to 3.8 V\n• Low current: Please refer to below table.\n• Offset mixer on-chip: The separate power supply control is possible. (only MB54608L)\n• Ou;

Fujitsu

富士通