MB3842PFV中文资料Power Management 2-ch Switch IC数据手册Fujitsu规格书

描述 Description

■DESCRIPTION
The MB3842/3845 is a power management switch with built-in 2-channel low-on resistance (typ. 100mΩ) switch. Output control is by means of a control signal, and the MB3842 is designed for high-active operation (output on when EN is Hi), while the MB3845 is designed for low-active operation (output on when ENis low.)
To provide adaptability to a variety of operations, the MB3842/3845 features low input voltage (VIN 2.5V)
operation and stable low-on resistance independent of input voltage. The switching current limit can be set from 100mA to 600mA by using external resistance, and when overcurrent conditions are detected the OC output goes low to provide an external notification signal.■FEATURES
• Low on resistance switch (typ. 100mΩ)
• Low input voltage operation (2.5 V to 5.5 V)
• Switch current (max. 0.6 A)
•UVLO :VIN  threshold  2.3V/2.1 V hysteresis 200 mV
• ENABLE :EN threshold  EN 1.4V/1.6 V for MB3842, EN1/2 VINfor MB3845
                             :Power supply current at output off = 0µA EN < 0.8V for MB3842, EN =VINfor MB3845
• External setting for soft start time and switch current limit.
• Over-temperature detection (switch latched off), over-current detection (not latched)
• OC pin flag set following overcurrent detection, over-temperature detection, or UVLO detection.
• Reverse current prevention at OFF (VIN  ≥1.5 V)
• Either channel may be operated alone.

特性 Features

• Low on resistance switch (typ. 100mΩ)
• Low input voltage operation (2.5 V to 5.5 V)
• Switch current (max. 0.6 A)
•UVLO :VIN  threshold  2.3V/2.1 V hysteresis 200 mV
• ENABLE :EN threshold  EN 1.4V/1.6 V for MB3842, EN1/2 VINfor MB3845
                             :Power supply current at output off = 0µA EN < 0.8V for MB3842, EN =VINfor MB3845
• External setting for soft start time and switch current limit.
• Over-temperature detection (switch latched off), over-current detection (not latched)
• OC pin flag set following overcurrent detection, over-temperature detection, or UVLO detection.
• Reverse current prevention at OFF (VIN  ≥1.5 V)
• Either channel may be operated alone.