MAX8650EEG集成电路（IC）的PMIC-稳压器-DCDC开关式控制器规格书PDF中文资料

General Description

The MAX8650 synchronous PWM buck controller operates from a 4.5V to 28V input and generates an adjustable 0.7V to 5.5V output voltage at loads up to 25A.

The MAX8650 uses a peak current-mode control architecture with an adjustable (200kHz to 1.2MHz) constant switching frequency and is externally synchronizable. The IC’s current limit uses the inductor’s DC resistance to improve efficiency or an external sense resistor for high accuracy. The current-limit threshold is adjusted with an external resistor. Foldback-type current limit can be implemented to reduce the power dissipation in overload or short-circuit conditions. Short-circuit protection is provided based on sensing the current in the low-side MOSFET. A reference input is provided for use with a high-accuracy external reference or for double-data-rate (DDR)-tracking applications.

特性 Features

♦ Operates from 4.5V to 28V Supply

♦ 1 FB Voltage Accuracy Over Temperature

♦ Adjustable Output Voltage Down to 0.7V or REFIN

♦ Adjustable Switching Frequency or External Synchronization from 200kHz to 1.2MHz

♦ 180° Phase-Shifted Clock Output

♦ Adjustable Overcurrent Limit

♦ Adjustable Foldback Current Limit

♦ Adjustable Slope Compensation

♦ Selectable Current-Limit Mode: Latch-Off or Automatic Recovery

♦ Monotonic Output-Voltage Rise at Startup

♦ Output Sources and Sinks Current

♦ Enable Input

♦ Power-OK (POK) Output

♦ Adjustable Soft-Start

♦ Independently Adjustable Overvoltage Protection

Applications

   Base Stations

   DDR

   Network and Telecom

   Power Modules

   Storage

   IBA Applications

   Servers