3-pin microprocessor resets

DESCRIPTION The MAX809/MAX810 are single function microprocessor resets used to monitor supply voltages in microprocessor and other logic systems. They provide a reset signal to the microprocessor during power-up, power-down, and brownout conditions. The reset signal is asserted when the supply

文件：92.78 Kbytes 页数：12 Pages

PHI

PHI

3-Pin Microprocessor Reset Monitors

The MAX809 and MAX810 are cost–effective system supervisor circuits designed to monitor VCC in digital systems and provide a reset signal to the host processor when necessary. No external components are required. Features • Precision VCC Monitor for 2.5 V, 3.0 V, 3.3 V, and 5.0 V Supplies • Pre

文件：90.98 Kbytes 页数：12 Pages

ONSEMI

安森美半导体

NPN SILICON EPITAXIAL TRANSISTOR WITH BUILT-IN 2 x 2SC5006 FLAT-LEAD 6-PIN THIN-TYPE ULTRA SUPER MINIMOLD

DESCRIPTION The µPA810TC has built-in low-voltage two transistors which are designed to amplify low noise in the VHF band to the UHF band. FEATURES • Low noise: NF = 1.2 dB TYP. @ f = 1 GHz, VCE= 3 V, IC= 7 mA • High gain: |S21e|2= 9.0 dB TYP. @ f = 1 GHz, VCE= 3 V, IC= 7 mA • Fla

文件：53.62 Kbytes 页数：12 Pages

NEC

瑞萨

NPN SILICON EPITAXIAL TRANSISTOR WITH BUILT-IN 2 x 2SC5006 FLAT-LEAD 6-PIN THIN-TYPE ULTRA SUPER MINIMOLD

DESCRIPTION The µPA810TC has built-in low-voltage two transistors which are designed to amplify low noise in the VHF band to the UHF band. FEATURES • Low noise: NF = 1.2 dB TYP. @ f = 1 GHz, VCE= 3 V, IC= 7 mA • High gain: |S21e|2= 9.0 dB TYP. @ f = 1 GHz, VCE= 3 V, IC= 7 mA • Fla

文件：53.62 Kbytes 页数：12 Pages

NEC

瑞萨