MAX5814集成电路（IC）的数模转换器（DAC）规格书PDF中文资料

General Description

The MAX5813/MAX5814/MAX5815 4-channel, low-power, 8-/10-/12-bit, voltage-output digital-to-analog converters (DACs) include output buffers and an internal reference that is selectable to be 2.048V, 2.500V, or 4.096V. The MAX5813/MAX5814/MAX5815 accept a wide supply voltage range of 2.7V to 5.5V with extremely low power (3mW) consumption to accommodate most low-voltage applications. A precision external reference input allows rail-to-rail operation and presents a 100kI (typ) load to an external reference.

Benefits and Features

♦ Four High-Accuracy DAC Channels

   ◇ 12-Bit Accuracy Without Adjustment

   ◇ ±1 LSB INL Buffered Voltage Output

   ◇ Guaranteed Monotonic Over All Operating

      Conditions

   ◇ Independent Mode Settings for Each DAC

♦ Three Precision Selectable Internal References

   ◇ 2.048V, 2.500V, or 4.096V

♦ Internal Output Buffer

   ◇ Rail-to-Rail Operation with External Reference

   ◇ 4.5µs Settling Time

   ◇ Outputs Directly Drive 2kI Loads

♦ Small 5mm x 4.4mm 14-Pin TSSOP or Ultra-Small

   1.6mm x 2.2mm 12-Bump WLP Package

♦ Wide 2.7V to 5.5V Supply Range

♦ Separate 1.8V to 5.5V VDDIO Power-Supply Input

♦ Fast 400kHz I2C-Compatible, 2-Wire Serial

   Interface

♦ Power-On-Reset to Zero-Scale DAC Output

♦ LDAC and CLR For Asynchronous Control

♦ Three Software-Selectable Power-Down Output

   Impedances

   ◇ 1kΩ, 100kΩ, or High Impedance

Applications

   Programmable Voltage and Current Sources

   Gain and Offset Adjustment

   Automatic Tuning and Optical Control

   Power Amplifier Control and Biasing

   Process Control and Servo Loops

   Portable Instrumentation

   Data Acquisition