MAX4631ESE集成电路（IC）的模拟开关多路复用器解复用器规格书PDF中文资料

General Description

The MAX4631/MAX4632/MAX4633 high-voltage, dual analog switches are pin compatible with the industry-standard DG401/DG403/DG405. They upgrade the existing devices with fault-protected inputs and Rail-to-Rail® signal handling capabilities. The MAX4631/MAX4632/MAX4633’s normally open (NO) and normally closed (NC) terminals are protected from overvoltage faults up to 36V during power-up or power-down. During a fault condition, these terminals become open circuit and only nanoamperes of leakage current flow from the source, yet the switch output (COM_) continues to furnish up to 18mA of the appropriate polarity supply voltage to the load. This ensures unambiguous rail-to-rail outputs when a fault begins and ends. On-resistance is 85Ω (max) at +25°C and is matched between switches to 6Ω (max). Off-leakage current is only 0.5nA at +25°C and 5nA at +85°C.

The MAX4631 has two NO single-pole/single-throw (SPST) switches. The MAX4632 has two NO/NC single-pole/double-throw (SPDT) switches. The MAX4633 has two NO double-pole/single-throw (DPST) switches.

These CMOS switches operate with dual power supplies ranging from ±4.5V to ±18V or a single supply between +9V and +36V. All digital inputs have +0.8V and +2.4V logic thresholds, ensuring both TTL- and CMOS-logic compatibility when using ±15V or a single +12V supply.

Features

♦ Fault Protection

   ±40V with Power Off

   ±36V with ±15V Supplies (MAX4631/MAX4633)

   ±25V with ±15V Supplies (MAX4632)

♦ Rail-to-Rail Signal Handling

♦ No Power-Supply Sequencing Required

♦ All Switches Off with Power Off

♦ Output Clamped to Appropriate Supply Voltage

   During Fault Condition; No Transition Glitch

♦ 85Ω (max) Signal Paths with ±15V Supplies

♦ ±4.5V to ±18V Dual Supplies

   +9V to +36V Single Supply

♦ Low Power Consumption: <6mW

♦ Pin Compatible with Industry-Standard

   DG401/DG403/DG405

♦ TTL- and CMOS-Logic Compatible Inputs with

   Single +9V to +15V, or ±15V Supplies

Applications

   ATE Equipment

   Data Acquisition

   Industrial and Process Control Systems

   Avionics

   Redundant/Backup Systems