MAX4284中文资料满摆幅、固定增益、放大/开环运算放大器数据手册ADI规格书

描述 Description

The MAX4174/MAX4175/MAX4274/MAX4275 GainAmp family combines a low-cost rail-to-rail op amp with precision internal gain-setting resistors and VCC/2 biasing. Factory-trimmed on-chip resistors decrease design size, cost, and layout, and provide 0.1% gain accuracy. Fixed inverting gains from -0.25V/V to -100V/V or noninverting gains from +1.25V/V to +101V/V are available. These devices operate from a single +2.5V to +5.5V supply and consume only 300µA. GainAmp amplifiers are optimally compensated for each gain version, achieving exceptional GBW products up to 23MHz (AV = +25V/V to +101V/V). High-voltage fault protection withstands µ17V at either input without excessive current draw.
Three versions are available in this amplifier family: single/dual/quad open-loop, unity-gain stable (MAX4281/MAX4282/MAX4284); single/dual fixed gain (MAX4174/MAX4274); and single/dual fixed gain plus internal VCC/2 bias at the noninverting input (MAX4175/MAX4275), which simplifies input biasing in single-supply designs. The input common-mode voltage range of the open-loop amplifiers extends from 150mV below the negative supply to within 1.2V of the positive supply. The outputs can swing rail-to-rail and drive a 1kΩ load while maintaining excellent DC accuracy. The amplifier is stable for capacitive loads up to 470pF.

特性 Features

·GainAmp Family Provides Internal Precision Gain-Setting Resistors in SOT23 (MAX4174/5)
·0.1% Gain Accuracy (RF/RG) (MAX4174/5, MAX4274/5)
·54 Standard Gains Available (MAX4174/5, MAX4274/5)
·Open-Loop Unity-Gain-Stable Op Amps (MAX4281/2/4)
·Rail-to-Rail Outputs Drive 1kΩ Load
·Internal VCC/2 Biasing (MAX4175/MAX4275)
·+2.5V to +5.5V Single Supply
·300µA Supply Current
·Up to 23MHz GBW Product
·Fault-Protected Inputs Withstand ±17V
·Stable with Capacitive Loads Up to 470pF with No Isolation Resistor

应用 Application

·蜂窝手机
·数码相机(DIGICAM)
·血糖表
·GPS方案
·红外接收器，用于远端控制
·仪表、终端与条码读卡器
·IP摄像机
·遥控钥匙
·低端电流检测放大器
·MP3和便携式媒体播放器
·光电二极管前置放大器
·便携式仪表
·智能读卡器