GENERAL DESCRIPTION

The LT3097 is a dual, positive and negative, high-performance,

low-dropout linear regulator featuring Analog Devices, Inc., ultralow

noise and ultra-high power supply rejection ratio (PSRR) architecture

for powering noise-sensitive applications. Each regulator

delivers up to 500 mA with a typical 260 mV/235 mV (positive/negative)

dropout voltage.

Operating quiescent current is nominally 2.2 mA/2.35 mA (positive/

negative) and drops to 0.3 μA/3 μA (positive/negative) in shutdown.

The LT3097 has a wide output voltage range (0 V to 15 V,

positive and 0 V to -19.5 V, negative) error amplifier that operates

in unity-gain and provides virtually constant output noise, PSRR,

bandwidth and load regulation, independent of the programmed

output voltage.

LT3097 is stable with a minimum 10 μF ceramic output capacitor for

each channel. Built-in protection includes internal current limit with

foldback and thermal limit with hysteresis. The positive regulator

also includes reverse-battery protection and reverse-current protection.

The LT3097 is available in a thermally enhanced, 22-lead 6

mm × 3 mm, Plastic dual-flat no-leads (DFN) package.

FEATURES

► Ultra-low output RMS noise: 0.8 μV rms (10 Hz to 100 kHz)

► Ultra-low output noise spectral density: 2 nV/√Hz (Positive) and

2.2 nV/√Hz (Negative) at 10 kHz

► Ultra-low 1/f noise: 10 μV p-p (Positive) and 3.2 μV p-p (Negative)

(0.1 Hz to 10 Hz)

► Ultra-high PSRR: 76 dB (Positive) and 74 dB (Negative) at 1

MHz

► Output current: 500 mA

► Wide input voltage range: ±1.8 V to ±20 V

► Single capacitor per channel improves noise and PSRR

► SET pin current: 100 μA, ±1 initial accuracy

► Single resistor per channel programs output voltage

► Programmable current limit

► Low-dropout voltage: 260 mV (Positive) and 235 mV (Negative)

► Output voltage range: 0 V to 15 V (Positive) and 0 V to –19.5 V

(Negative)

► Programmable power good

► Fast start-up capability

► Precision enable/undervoltage lockout (UVLO)

► Internal current limit with foldback

► Minimum output capacitor: 10 μF ceramic

► Compact, low-profile, 22-lead, 6 mm × 3 mm, Plastic DFN package

APPLICATIONS

► Bipolar very low-noise power supplies

► RF power supplies: phase-locked loops, voltage-controlled oscillators,

mixers, low-noise amplifiers, and power amplifiers

► Low-noise instrumentation

► High-speed and high-precision data converters

► Medical applications: imaging and diagnostics

► Precision power supplies

► Postregulator for switching supplies

MAX38913属于集成电路（IC） > 线性 + 开关稳压器。亚德诺半导体技术有限公司制造生产的MAX38913稳压器 - 线性线性稳压器用于提供稳定的输出电压，无论负载电流、输入电压或环境因素如何变化，这些输出电压通常都要保持不变。它们的工作原理要求输入电压维持在高于所需的输出电压，而且要超出某个最小量，并且在工作时会将输入端的任何多余电压转换为热量。对于大多数应用而言，虽然这种稳压器的效率低于开关模式的稳压器，但它们通常更适合对噪声高度敏感的应用。