MAX3238ECDWR集成电路（IC）的驱动器接收器收发器规格书PDF中文资料

MAX3238ECDWR属于集成电路（IC）的驱动器接收器收发器。由美国德州仪器公司制造生产的MAX3238ECDWR驱动器，接收器，收发器该系列产品的主要功能是提供必需的硬件资源，以通过延长电缆或印制线进行通信。确切的功能会因所采用的通信协议而异，可能包括诸如瞬态抑制之类的功能，这些功能对于通信用途可能并非绝对必要，但对于可能的使用环境却是明智之选。

FEATURES

RS-232 Bus-Pin ESD Protection Exceeds

±15 kV Using Human-Body Model (HBM)

Meets or Exceeds the Requirements of

TIA/EIA-232-F and ITU v.28 Standards

Operates With 3-V to 5.5-V VCC Supply

Operates up to 400 kbit/s

Five Drivers and Three Receivers

Auto-Powerdown Plus Feature Enables

Flexible Power-Down Mode

Low Standby Current . . . 1 mA Typical

External Capacitors . . . 4 ´ 0.1 mF

Accepts 5-V Logic Input With 3.3-V Supply

Always-Active Noninverting Receiver Output

(ROUT1B)

Alternative High-Speed Pin-Compatible

Device (1 Mbit/s) for SNx5C3238

ESD Protection for RS-232 Interface Pins

– ±15 kV – Human-Body Model (HBM)

– ±8 kV – IEC61000-4-2, Contact Discharge

– ±15 kV – IEC61000-4-2, Air-Gap Discharge

APPLICATIONS

Battery-Powered Systems

PDAs

Notebooks

Subnotebooks

Laptops

Palmtop PCs

Hand-Held Equipment

Modems

Printers

DESCRIPTION/ORDERING INFORMATION

The MAX3238E consists of five line drivers, three line receivers, and a dual charge-pump circuit with ±15-kV

ESD (HBM) protection on the driver output (DOUT) and receiver input (RIN) terminals. The device meets the

requirements of TIA/EIA-232-F and provides the electrical interface between notebook and subnotebook

computer applications. The charge pump and four small external capacitors allow operation from a single 3-V to

5.5-V supply. In addition, the device includes an always-active noninverting output (ROUT1B), which allows

applications using the ring indicator to transmit data while the device is powered down. This device operates at

data signaling rates up to 250 kbit/s and a maximum of 30-V/ms driver output slew rate.