MAX3232EIPWRQ1集成电路（IC）的驱动器接收器收发器规格书PDF中文资料

MAX3232EIPWRQ1属于集成电路（IC）的驱动器接收器收发器。由德州仪器制造生产的MAX3232EIPWRQ1驱动器，接收器，收发器该系列产品的主要功能是提供必需的硬件资源，以通过延长电缆或印制线进行通信。确切的功能会因所采用的通信协议而异，可能包括诸如瞬态抑制之类的功能，这些功能对于通信用途可能并非绝对必要，但对于可能的使用环境却是明智之选。

1 Features

• Qualified for automotive applications

• Meets or exceeds the requirements of TIA/

EIA-232-F and ITU v.28 standards

• Operates with 3V to 5.5V VCC supply

• Operates up to 250kbit/s

• Two drivers and two receivers

• Low standby current: 300μA Typical

• External capacitors: 4 × 0.1μF

• Accepts 5V logic input with 3.3V supply

• Pin compatible to alternative high-speed pincompatible

device (1Mbit/s): SNx5C3232

2 Applications

• Industrial PCs

• Wired networking

• Data center and enterprise computing

• Battery-powered systems

• Notebooks

• Palmtop PCs

• Hand-held equipment

3 Description

The MAX3232E device consists of two line drivers,

two line receivers, and a dual charge-pump

circuit with ±15kV IEC ESD protection pin to pin

(serial-port connection pins, including GND). The

device meets the requirements of TIA/EIA-232-F

and provides the electrical interface between an

asynchronous communication controller and the

serial-port connector. The charge pump and four small

external capacitors allow operation from a single 3V

to 5.5V supply. The device operates at data signaling

rates up to 250kbit/s and a maximum of 30V/μs driver

output slew rate.