MAX3232CDB集成电路（IC）的驱动器接收器收发器规格书PDF中文资料

MAX3232CDB属于集成电路（IC）的驱动器接收器收发器。由德州仪器制造生产的MAX3232CDB驱动器，接收器，收发器该系列产品的主要功能是提供必需的硬件资源，以通过延长电缆或印制线进行通信。确切的功能会因所采用的通信协议而异，可能包括诸如瞬态抑制之类的功能，这些功能对于通信用途可能并非绝对必要，但对于可能的使用环境却是明智之选。

1 Features

• RS-232 Bus-terminal esd protection exceeds

±15 kV using human-body model (HBM)

• Meets or exceeds the requirements of TIA/

EIA-232-F and ITU V.28 standards

• Operates with 3-V to 5.5-V VCC supply

• Operates up to 250 kbit/s

• Two drivers and two receivers

• Low supply current: 300 μA Typical

• External capacitors: 4 × 0.1 μF

• Accepts 5-V logic input with 3.3-V supply

• Alternative high-speed terminal-compatible

devices (1 Mbit/s)

– SN65C3232 (–40°C to 85°C)

– SN75C3232 (0°C to 70°C)

2 Applications

• Industrial PCs

• Wired networking

• Data center and enterprise networking

• Battery-powered systems

• PDAs

• Notebooks

• Laptops

• Palmtop PCs

• Hand-held equipment

3 Description

The MAX3232 device consists of two line drivers,

two line receivers, and a dual charge-pump circuit

with ±15-kV ESD protection terminal to terminal

(serial-port connection terminals, including GND).

The device meets the requirements of TIA/EIA-232-

F and provides the electrical interface between

an asynchronous communication controller and the

serial-port connector. The charge pump and four small

external capacitors allow operation from a single 3-V

to 5.5-V supply. The devices operate at data signaling

rates up to 250 kbit/s and a maximum of 30-V/μs

driver output slew rate.