MAX22514EVKIT开发板套件编程器的评估演示板及套件规格书PDF中文资料

MAX22514EVKIT属于开发板套件编程器的评估演示板及套件。由亚德诺半导体技术有限公司制造生产的MAX22514EVKIT评估和演示板及套件该系列产品提供了一种方便的方法，在经过验证的实施环境中评估某些重点器件的性能或特性。评估方法通常有完善的文档说明，并且视乎具体情况由评估软件提供支持。产品通常由印刷电路板组成，板上已装有重点器件以及必要或有用的支持元器件，另外也可能包括其他组件，例如电缆或电源。对于数量特别多或类别独特的器件类别(如 ADC、DAC 和开关模式电源)，评估平台可组合为一个单独的产品系列。

Product Highlights

• High Configurability and Integration

• IO-Link Device and Master Applications

• COM1, COM2, and COM3 Data Rates

• Integrated High-Efficiency 200mA DC-DC Buck

Regulator

• 200μA/2mA/5mA Current Sinks/Sources

• C/Q Receiver is Configurable for 5V TTL

• Highly Configurable Driver Overload Handling

• Four Selectable Driver Slew Rates

• SPI Configuration and Monitoring

• Integrated Temperature Sensor

• Configurable C/Q Driver: PNP, NPN, and PP

Modes

• Integrated Protection Enables Robust Systems

• Integrated ±1kV/500 Surge Protection

• Spread Spectrum DC-DC

• Reverse Polarity Protection

• Glitch Filter for Improved Burst Resilience

• Hot-Plug Protection

• Optimized for Small Sensor Designs

• Accurate Oscillator for IO-Link Communication

• 2.4 (typ) Driver On-Resistance for Low Power

Dissipation

• 1.2MHz DC-DC Switching Rate

• Integrated 3.3V and 5V Linear Regulators

• Available in Tiny WLP (2.5mm x 2.6mm) and

TQFN (4mm x 5mm) Packages

Key Applications

• IO-Link and Industrial Sensor and Actuator Devices

• The MAX22514 features a SPI interface for

configuration and diagnostics. A high level of

integration (including two linear regulators, a DC-DC

buck regulator, and integrated surge protection,

combined with low power dissipation and small

packages) optimizes the MAX22514 for use in many

different industrial and IO-Link small sensor applications.

• IO-Link Master Transceivers

The MAX22514 is capable of being used in both IOLink

devices and IO-Link master applications. A SPI

interface is used for extended configurability and

diagnostics, and the transceiver is capable of

operating at the COM1, COM2, and COM3 IO-Link

data rates. The MAX22514 can be configured to

enable the required 5mA pull-down/pull-up current

on the C/Q line and generate a wake-up pulse.