MAX213中文资料具有 +/-9V 输出和 +/-15kV ESD 保护的 5V 多通道 120kbps RS-232 线路驱动器/接收器数据手册TI规格书

描述 Description

The MAX213 device consists of four line drivers, five line receivers, and a dual charge-pump circuit with ±15-kV ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 5-V supply. The devices operate at data signaling rates up to 120 kbit/s and a maximum of 30-V/µs driver output slew rate. The MAX213 has an active-low shutdown (SHDN) and an active-high enable control (EN). In shutdown mode, the charge pumps are turned off, V+ is pulled down to VCC, V– is pulled to GND, and the transmitter outputs are disabled. This reduces supply current typically to 1 µA. Two receivers of the MAX213 are active during shutdown.

特性 Features

• ESD Protection for RS-232 Bus Pins
• ±15-kV Human-Body Model (HBM)

• Meets or Exceeds the Requirements of TIA/EIA-232-F and ITU v.28 Standards
• Operates at 5-V VCC Supply
• Four Drivers and Five Receivers
• Operates up to 120 kbit/s
• Low Supply Current in Shutdown Mode . . . 15 µA Typ
• External Capacitors . . . 4 × 0.1 F
• Designed to Be Interchangeable With Maxim MAX213
• Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
• APPLICATIONS
• Battery-Powered Systems
• PDAs
• Notebooks
• Laptops
• Palmtop PCs
• Hand-Held Equipment

简介

MAX213属于集成电路（IC）的驱动器接收器收发器。由TI制造生产的MAX213驱动器，接收器，收发器该系列产品的主要功能是提供必需的硬件资源，以通过延长电缆或印制线进行通信。确切的功能会因所采用的通信协议而异，可能包括诸如瞬态抑制之类的功能，这些功能对于通信用途可能并非绝对必要，但对于可能的使用环境却是明智之选。