MAX16804ATP集成电路（IC）的LED驱动器规格书PDF中文资料

General Description

The MAX16804 current regulator operates from a 5.5V to 40V input voltage range and delivers 35mA to 350mA to one or more strings of high-brightness LEDs (HB LEDs). The output current of the MAX16804 is set by using an external current-sense resistor in series with the LEDs. A dual-mode DIM pin and on-board 200Hz ramp generator allow PWM dimming with an analog or PWM input signal. The analog control signal at dimming input DIM allows for a theater-dimming effect to be implemented. Fast turn-on and turn-off times ensure a wide-range PWM operation, while wave-shaping circuitry minimizes EMI.

特性 Features

♦ Flexible Dimming Control, Analog or PWM Control Signal for PWM and Theater Dimming

♦ 200Hz On-Board Ramp Generator

♦ Sinks to External PWM Signal (Up to 2kHz)

♦ 5.5V to 40V Operating Range

♦ 35mA to 350mA Adjustable LED Current

♦ 3 LED Current Accuracy

♦ High-Voltage (Up to 40V) DIM Pin

♦ Integrated Pass Element with Low-Dropout Voltage (0.5V typ)

♦ Additional +5V On-Board Regulator with 2mA Capability

♦ Differential LED Current Sense

♦ Low 200mV Current-Sense Reference Reduces Power Losses

♦ Wave-Shaped Edges Minimize EMI During PWM Dimming

♦ Output Short-Circuit and Thermal-Shutdown Protection

♦ Available in Small, Thermally Enhanced, 5mm x 5mm, 20-Pin TQFN Package

♦ -40°C to +125°C Operating Temperature Range

Applications

  Automotive Interior: Map, Dome, and Courtesy Lighting

  Automotive Exterior:

     Rear Combination Light (RCL)

     Daytime Running Light (DRL)

     Adaptive Front Light

  Warning Lights for Emergency Vehicles

  Navigation and Marine Indicators

  Signage, Canopies, and Beacons