Active-Matrix Liquid Crystal Display AMLCD Supply

General Description The MAX1661/MAX1662/MAX1663 serial-to-parallel/parallel-to-serial converters are intended to control external power MOSFETs in power-plane switching applications. These small, low-cost devices can be used on a system motherboard to control point-of-load switching from a 2-wi

文件：249.99 Kbytes 页数：16 Pages

Maxim

美信

Serial-to-Parallel/Parallel-to-Serial Converters and Load-Switch Controllers with SMBus Interface

General Description The MAX1661/MAX1662/MAX1663 serial-to-parallel/parallel-to-serial converters are intended to control external power MOSFETs in power-plane switching applications. These small, low-cost devices can be used on a system motherboard to control point-of-load switching from a 2-wi

文件：148.47 Kbytes 页数：16 Pages

Maxim

美信

串-并/并-串转换器及负载开关控制器，带有SMBus接口

The MAX1661/MAX1662/MAX1663 serial-to-parallel/parallel-to-serial converters are intended to control external power MOSFETs in power-plane switching applications. These small, low-cost devices can be used on a system motherboard to control point-of-load switching from a 2-wire SMBus™ serial interfac \n• Performs Serial-to-Parallel and Parallel-to-Serial Conversions \n• Three General-Purpose Digital Input/Output Pins (withstand +28V) \n• SMBus 2-Wire Serial Interface \n• Supports SMBSUS-bar Asynchronous Suspend Mode \n• 3µA Supply Current \n• +2.7V to +5.5V Supply Range \n• Space-Saving, Low-Cos;

ADI

亚德诺

Serial-to-Parallel/Parallel-to-Serial Converters and Load-Switch Controllers with SMBus Interface

General Description The MAX1661/MAX1662/MAX1663 serial-to-parallel/parallel-to-serial converters are intended to control external power MOSFETs in power-plane switching applications. These small, low-cost devices can be used on a system motherboard to control point-of-load switching from a 2-wi

文件：148.47 Kbytes 页数：16 Pages

Maxim

美信

带集成驱动器的开关式储能转换器(STC)控制器

MAX16610/MAX16610A IC是高度集成、可扩展的控制器，适用于开关式储能转换器(STC)拓扑。STC提供从60V–40V输入总线到中间总线电压的高效零电流开关(ZCS)电压转换。中间总线电压未经调节，约为输入电压的四分之一。\n\n 4:1 STC拓扑需要驱动10个FET，其中只有3个FET接地。MAX16610/MAX16610A提供高度密集的解决方案，具有集成驱动器和浮动电源生成功能。\n\n 自适应算法通过调整STC导通时间保持ZCS，而不受STC元件变化和容差（例如，温度系数、老化和电压降额）的影响。借助自适应算法，MAX16610/MAX16610A • 高密度和简化的设计\n• 用于10个FET的集成驱动器\n\n• 集成浮动域生成功能\n\n\n\n\n• 效率优化不受元件变化的影响\n• 自适应导通时间算法确保零电流开关\n\n• 支持广泛的基线谐振频率范围\n\n\n\n\n• 可靠性更高\n• 通过自适应算法强制执行最短关断时间\n\n• 防止元件过载和过大的峰值电流\n\n\n\n\n• 保护特性\n• 输入过流保护（锁存）\n\n• 输出过压保护\n• SOAR缓解和OVP\n\n\n\n\n\n\n• 偏置电源欠压保护\n\n• 元件故障保护\n\n• 故障/输出电压指示器\n• 严重故障标志输出引脚\n\n• 电源良好指示;

ADI

亚德诺

Package：10-TFSOP，10-MSOP（0.118"，3.00mm 宽）；包装：管件 类别：集成电路（IC） 专用 描述：IC INTERFACE SPECIALIZED 10UMAX

AD

亚德诺