MAX1186集成电路（IC）的模数转换器（ADC）规格书PDF中文资料

General Description

The MAX1186 is a 3V, dual 10-bit analog-to-digital converter (ADC) featuring fully-differential wideband trackand-hold (T/H) inputs, driving two pipelined, nine-stage ADCs. The MAX1186 is optimized for low-power, high dynamic performance applications in imaging, instrumentation, and digital communication applications. This ADC operates from a single 2.7V to 3.6V supply, consuming only 105mW while delivering a typical signal-tonoise ratio (SNR) of 59.4dB at an input frequency of 20MHz and a sampling rate of 40Msps.

Features

♦ Single 3V Operation

♦ Excellent Dynamic Performance:

    59.4dB SNR at fIN = 20MHz

    72dBc SFDR at fIN = 20MHz

♦ Low Power:

    35mA (Normal Operation)

    2.8mA (Sleep Mode)

    1µA (Shutdown Mode)

♦ 0.02dB Gain and 0.25° Phase Matching

♦ Wide ±1VP-P Differential Analog Input Voltage Range

♦ 400MHz, -3dB Input Bandwidth

♦ On-Chip 2.048V Precision Bandgap Reference

♦ Single 10-Bit Bus for Multiplexed, Digital Outputs

♦ User-Selectable Output Format—Two’s Complement or Offset Binary

♦ 48-Pin TQFP Package with Exposed Paddle For Improved Thermal Dissipation

Applications

    High-Resolution Imaging

    I/Q Channel Digitization

    Multichannel IF Sampling

    Instrumentation

    Video Application

    Ultrasound