MAX116EAX集成电路（IC）的模数转换器（ADC）规格书PDF中文资料

General Description

The MAX115/MAX116 are high-speed, multichannel, 12-bit data-acquisition systems (DAS) with simultaneous track/holds (T/Hs). These devices contain a 12-bit, 2µs, successive-approximation analog-to-digital converter (ADC), a +2.5V reference, a buffered reference input, and a bank of four simultaneous-sampling T/H amplifiers that preserve the relative phase information of the sampled inputs. The MAX115/MAX116 have two multiplexed inputs for each T/H, allowing a total of eight inputs. In addition, the converter is overvoltage tolerant to ±17V. A fault condition on any channel will not damage the IC. Available input ranges are ±5V (MAX115) and ±2.5V (MAX116).

Features

♦Four Simultaneous-Sampling T/H Amplifiers with Two Multiplexed Inputs (Eight Single-Ended Inputs Total)

♦2µs Conversion Time per Channel

♦Throughput: 390ksps (1 Channel)

  218ksps (2 Channels)

  152ksps (3 Channels)

  116ksps (4 Channels)

♦Input Range: ± 5V (MAX115)

                   ± 2.5V (MAX116)

♦Fault-Protected Input Multiplexer (±17V)

♦Internal +2.5V or External Reference Operation

♦Programmable On-Board Sequencer

♦High-Speed Parallel DSP Interface

♦Internal 10MHz Clock

Applications

Multiphase Motor Control

Power-Grid Synchronization

Power-Factor Monitoring

Digital Signal Processing

Vibration and Waveform Analysis