MAX11300PMB1数据手册开发板套件编程器的评估演示板及套件规格书PDF

描述 Description

The MAX11300PMB1 peripheral module (Pmod™) provides the necessary hardware to interface the MAX11300 20-channel programmable mixed-signal I/O device to any system that utilizes Pmod-compatible expansion ports configurable for SPI communication. The device is a 12-bit multichannel analog-to-digital converter (ADC) and a 12-bit buffered DAC output in a single IC. This device also includes software-configurable general-purpose I/O ports. A local and two remote temperature sensors keep track of junction and environmental temperatures. Adjacent pairs of ports can also be used as logic translator or analog switch. Each pin can also be used as a positive input of a comparator with programmable threshold.
Refer to the MAX11300 IC data sheet for detailed information regarding operation of the device and the USB2PMB1 (Munich) adapter board data sheet for detailed information regarding the Munich board and GUI. Refer to the MAX11300 peripheral module and Munich adaptor board Quick Start Guide for step-by-step evaluation instructions. Refer to the MAX11300 Configuration Software User Guide, in the full data sheet, for detailed information using the design tool.
Note: the MAX11300SYS1 includes both the USB2PMB1 and the MAX11300PMB1.

特性 Features

• Up to 20 12-Bit ADC Programmable Inputs
• Up to 20 12-Bit DACs with 25mA Current Capability
• 70mA max at +12V with On-Board Power Supply
• Use External Power Supply at VDDIO (VDDIO Jumper Removed) if More Current is Needed
• Up to 20 Digital I/Os
• Up to 20 Comparator Inputs
• Internal or External Reference for ADC and DAC
• Individually Selectable ADC References for Each Port
• Internal Temperature Sensor (-40°C to +125°C, ±3°C Accuracy)
• Two Remote Temperature-Measurement Controllers (-40°C to +150°C, ±3°C Accuracy)
• 2x6-Pin Pmod-Compatible Connector (SPI)
• RoHS Compliant
• Proven PCB Layout
• Fully Assembled and Tested

应用 Application

• 基站RF用电设备偏压控制器
• 光元件控制
• 工业控制与自动化
• 电源监视
• 系统监控和控制

简介

MAX11300PMB1属于开发板套件编程器的评估演示板及套件。由制造生产的MAX11300PMB1评估和演示板及套件该系列产品提供了一种方便的方法，在经过验证的实施环境中评估某些重点器件的性能或特性。评估方法通常有完善的文档说明，并且视乎具体情况由评估软件提供支持。产品通常由印刷电路板组成，板上已装有重点器件以及必要或有用的支持元器件，另外也可能包括其他组件，例如电缆或电源。对于数量特别多或类别独特的器件类别(如 ADC、DAC 和开关模式电源)，评估平台可组合为一个单独的产品系列。