12-Channel, High-Voltage Battery-Pack Fault Monitor

General Description The MAX11080/MAX11081 are battery-pack fault-monitor ICs capable of monitoring up to 12 lithium-ion (Li+) battery cells. This device is designed to provide an overvoltage or undervoltage fault indication when any of the cells cross the user-selectable threshold for longer than

文件：254.68 Kbytes 页数：27 Pages

MAXIM

美信

12-Channel, High-Voltage Battery-Pack Fault Monitors

文件：423.39 Kbytes 页数：29 Pages

MAXIM

美信

12通道、高压电池组故障监测器

MAX11080/MAX11081是一款电池组故障监测IC，可以监测最多12节锂离子(Li+)电池。该器件经过专门设计，当任意一节电池电压超过用户可选门限的时间长于预设的可编程延迟间隔时，产生过压或欠压故障指示。过压电平可在+3.3V至+4.8V间，以100mV为间隔，通过引脚设置，在整个温度范围内保证具有±25mV的精度。欠压电平也允许用户在+1.6V至+2.8V间，以200mV为间隔选择。这些电平在整个温度范围内能够保证±100mV的精度。欠压检测可以通过其中的一个用户配置选项禁止。\n MAX11080/MAX11081带有内置电平转换器，可以实现最多31个MAX11080/MAX110 \n• 最多12节Li+电池电压故障检测 \n• 工作在6.0V至72V \n• 引脚可选的过压门限，+3.3V至+4.8V，以100mV为间隔 \n• ±25mV过压检测精度 \n• 引脚可选的欠压门限，+1.6V至+2.8V，以200mV为间隔 \n• ±100mV欠压检测精度 \n• 过压/欠压检测门限滞回 \n• MAX11080：300mV \n• MAX11081：37.5mV\n• 采用外部电容在3.0ms至3.32s之间设置报警检测的延迟时间 \n• 菊链报警和关断功能，带有激励状态信号 \n• 最多可连接31个器件 \n• 超低功耗 \n• 工作模式电流：80µA \n• 关;

ADI

亚德诺

12-Channel, High-Voltage Battery-Pack Fault Monitor

General Description The MAX11080/MAX11081 are battery-pack fault-monitor ICs capable of monitoring up to 12 lithium-ion (Li+) battery cells. This device is designed to provide an overvoltage or undervoltage fault indication when any of the cells cross the user-selectable threshold for longer than

文件：254.68 Kbytes 页数：27 Pages

MAXIM

美信

12-Channel, High-Voltage Battery-Pack Fault Monitor

General Description The MAX11080/MAX11081 are battery-pack fault-monitor ICs capable of monitoring up to 12 lithium-ion (Li+) battery cells. This device is designed to provide an overvoltage or undervoltage fault indication when any of the cells cross the user-selectable threshold for longer than

文件：254.68 Kbytes 页数：27 Pages

MAXIM

美信

12-Channel, High-Voltage Battery-Pack Fault Monitor

General Description The MAX11080/MAX11081 are battery-pack fault-monitor ICs capable of monitoring up to 12 lithium-ion (Li+) battery cells. This device is designed to provide an overvoltage or undervoltage fault indication when any of the cells cross the user-selectable threshold for longer than

文件：254.68 Kbytes 页数：27 Pages

MAXIM

美信

12-Channel, High-Voltage Battery-Pack Fault Monitors

文件：423.39 Kbytes 页数：29 Pages

MAXIM

美信

12-Channel, High-Voltage Battery-Pack Fault Monitors

文件：423.39 Kbytes 页数：29 Pages

MAXIM

美信

12-Channel, High-Voltage Battery-Pack Fault Monitors

文件：423.39 Kbytes 页数：29 Pages

MAXIM

美信

包装：盒 功能：电池监控器 类别：开发板，套件，编程器 评估和演示板及套件 描述：KIT FAULT MONITOR 12CH HV

AD

亚德诺