MAX1104中文资料8位编解码器数据手册ADI规格书

描述 Description

The MAX1102/MAX1103/MAX1104 CODECs provide both an 8-bit analog-to-digital converter (ADC) and an 8-bit digital-to-analog converter (DAC) with a 4-wire logic interface. The MAX1102/MAX1103 include an onboard +2V/+4V reference, providing a well-regulated, low noise reference for both the ADC and DAC. The MAX1104 offers ratiometric conversion, with the reference internally connected to VDD.
The MAX1102/MAX1103/MAX1104 are low-cost, low-power CODECs for use with microcontrollers (µCs). They allow for greater flexibility when selecting µC. Less expensive µCs without onboard converters can be used while maintaining overall system performance.
The MAX1102 operates from a single +2.7V to +3.6V supply, the MAX1103 operates from a +4.5V to +5.5V supply, and the MAX1104 operates from a +2.7V to +5.5V supply. The MAX1102/MAX1103 incorporate a VDD monitor in addition to AIN for power supply monitoring. All devices feature a low 18µA standby mode, where both data converters are disabled while the reference remains active, and three shutdown modes: ADC disabled, DAC disabled, and complete shutdown (1µA). A quick 10µs wake-up time allows the MAX1102/MAX1103/MAX1104 to cycle in and out of shutdown even during short-duration idle times.
The MAX1102/MAX1103/MAX1104 are available in a space-saving 8-pin µMAX® package.

特性 Features

• 8-Bit ADC
• ±1 LSB INL
• Built-In Track-and-Hold
• 48dB of SINAD
• 8-Bit DAC
• ±1 LSB INL
• 55dB of SFDR
• Internal Conversion Clock
• Single-Supply Operation
• +2.7V to +3.6V (MAX1102)
• +4.5V to +5.5V (MAX1103)
• +2.7V to +5.5V (MAX1104)
• Low Power Consumption
• 0.5mA at 25ksps
• 1µA Shutdown Mode
• 6MHz 4-Wire SPI™, QSPI™, and MICROWIRE™ Compatible Interface
• Compact 8-Pin µMAX Package
• Internal Voltage Reference
• +2V: MAX1102
• +4V: MAX1103
• Power-Supply Monitor (MAX1102/MAX1103)
• Rail-to-rail DAC Output Buffer

应用 Application

• 用于微控制器的模拟I/O
• 模拟系统信号监控
• 录音与重放

简介

MAX1104属于开发板套件编程器的评估板-模数转换器（ADC）。由制造生产的MAX1104评估板 - 模数转换器（ADC）模数转换器 (ADC) 评估板是预装有元器件的电路板，用于提供特定 ADC 或器件工作实例。特定板上的 A/D 转换器数量从 3 到 32 不等，每秒采样率从 2.5 kHz 到 26 GHz 不等，输入电压范围从 0 到 8 Vp-p。