MAX1080中文资料300ksps/400ksps、单电源、低功耗、8通道、串行10位ADC，内置电压基准数据手册ADI规格书

描述 Description

The MAX1080/MAX1081 10-bit analog-to-digital converters (ADCs) combine an 8-channel analog-input multiplexer, high-bandwidth track/hold (T/H), and serial interface with high conversion speed and low power consumption. The MAX1080 operates from a single +4.5V to +5.5V supply; the MAX1081 operates from a single +2.7V to +3.6V supply. Both devices' analog inputs are software configurable for unipolar/bipolar and single-ended/pseudo-differential operation.
The 4-wire serial interface connects directly to SPI™/QSPI™ and MICROWIRE™ devices without external logic. A serial strobe output allows direct connection to TMS320-family digital signal processors. The MAX1080/MAX1081 use an external serial-interface clock to perform successive-approximation analog-to-digital conversions. The devices feature an internal +2.5V reference and a reference-buffer amplifier with a ±1.5% voltage-adjustment range. An external reference with a 1V to VDD1 range may also be used.
The MAX1080/MAX1081 provide a hard-wired activel-low SHDN pin and four software-selectable power modes (normal operation, reduced power (REDP), fast power-down (FASTPD), and full power-down (FULLPD)). These devices can be programmed to automatically shut down at the end of a conversion or to operate with reduced power. When using the power-down modes, accessing the serial interface automatically powers up the devices, and the quick turn-on time allows them to be shut down between all conversions. This technique can cut supply current below 100mA at lower sampling rates.
The MAX1080/MAX1081 are available in a 20-pin TSSOP package. These devices are higher-speed versions of the MAX148/MAX149. For more information, refer to the respective data sheet.

特性 Features

·8-Channel Single-Ended or 4-Channel
·Pseudo-Differential Inputs
·Internal Multiplexer and Track/Hold
·Single-Supply Operation

· +4.5V to +5.5V (MAX1080)
· +2.7V to +3.6V (MAX1081)

·Internal +2.5V Reference
·400ksps Sampling Rate (MAX1080)
·Low Power: 2.5mA (400ksps)

· 1.3mA (REDP)
· 0.9mA (FASTPD)
· 2µA (FULLPD)

·SPI/QSPI/MICROWIRE/TMS320-Compatible 4-Wire Serial Interface
·Software-Configurable Unipolar or Bipolar Inputs
·20-Pin TSSOP Package

应用 Application

·电池供电应用
·数据采集
·医疗仪器
·笔输入量化器
·便携式数据记录
·过程控制

简介

MAX1080属于集成电路（IC）的模数转换器（ADC）。由制造生产的MAX1080模数转换器（ADC）模数转换器（ADC、A/D 或 A 转 D）对模拟信号进行采样，例如由麦克风采集的声音或传感器的输出，然后将其转换为数字信号。一般来说，数字输出是二进制补码二进制数，与输入成比例。输入类型可能是差分、伪差分或单端输入。模数转换器可按照位数、采样率、输入数、接口、转换器数和架构（例如自适应增量、双斜率、折叠、流水线、SAR、三角积分、两步式）进行选择。