MANO9600中文资料CMOS 图像传感器，卷帘快门，9.6 MP数据手册ONSEMI规格书

描述 Description

The MANO9600 is a rolling shutter CMOS image sensor with a
resolution of 3840 x 2500 pixels.
The high sensitivity 2.4 μm x 2.4 μm pixels supports correlated
double sampling readout reducing noise and increasing dynamic
range.
The MANO9600 has a high level of programmability using a four wire serial peripheral
interface that enables the user to read out specific regions of interest.
Higher frame rates are achieved with single ROI or sub-sampled
readout modes. The sensor has built-in features for bias control
and power supply regulation.
The sensor has on-chip programmable gain amplifiers and 10-bit
A/D converters. The integration time and gain parameters can be
reconfigured without any visible image artifact. Optionally the
on-chip automatic exposure control loop (AEC) controls these
parameters dynamically. The image's black level is either
calibrated automatically or can be adjusted by adding a user
programmable offset.
The image data interface of the M1-SN/SE part consists of four
LVDS lanes running at 620 Mbps, facilitating frame rates up to
20 frames per second. A separate synchronization and clock
channel containing payload information is provided to facilitate
the image reconstruction at the receive end. The M2-SN/SE part
provides a parallel CMOS output interface at reduced frame rate.
The MANO 9600 is packaged in a 52-pin LCC package.

特性 Features

High Full Well Capacity
High maximum SNR for demanding applications
Industrial sensor with compact pixel size
Nearly 10MP resolution in just 2/3 inch format
High configurability
High flexibility to optimize sensor performance for customer application
Fast adaptability
Fast switching between operating modes

应用 Application

BiometricsMedical imagingMachine Vision
Biometric finger scanner, palm scanner and iris scanner equipmentMedical analysis equipmentIndustrial inspection systems