MA280中文资料久昌科技数据手册PDF规格书

GENERAL DESCRIPTION

The MA280 is an integrated hall sensor with output drivers, mainly designed for

electronic commutation of brush-less DC Fan. This IC is using HV BCD process internally

includes the regulator, protecting diode, Hall plate, amplifier, comparator, and a pair of

complementary open-Drain outputs (DO, DOB).

While the magnetic flux density (B) is larger than operate point (Bop), DO will turn on

(low), and meanwhile DOB will turn off (high). Each output is latched until B is lower than

release point (Brp), and then DO, DOB transfer each state. For DC fan application,

sometimes need to test power reverse connection condition. Internal diode only protects

chip-side but not for coil-side. If necessary, add one external diode to block the reverse

current from coil-side.

 FEATURES

- On-Chip Hall Effect Sensor with Two Different Sensitivity and Hysteresis Settings

- Wide Operating Voltage Range: 4.0V~20V

- Output Sink Current up to 0.4A

- Built-in FG Output

- -40°C to 85°C Operating Temperature

- Low Profile SOT23-6F Package ( Green and Lead Free )