MA211KP4A中文资料久昌科技数据手册PDF规格书

GENERAL DESCRIPTION

MA211K are integrated Hall sensors with output drivers, mainly designed for electronic

commutation of brush-less DC Fan. This IC is using HV BCD process internally includes the

regulator, protecting diode, Hall plate, amplifier, comparator, and a pair of complementary

open-Drain outputs (DO, DOB).

While the magnetic flux density (B) is larger than operate point (Bop), DO will turn on

(low), and meanwhile DOB will turn off (high). Each output is latched until B is lower than

release point (Brp), and then DO, DOB transfer each state.

To avoid coil burning, rotor-lock shutdown detection circuit shut down the output driver if

the rotor is blocked and then the automatic recovery circuit will try to restart the motor. This

function repeats while rotor is blocked. Until the blocking is removed, the motor recovers

running normally.

 FEATURES

- On-chip Hall effect sensor with two different sensitivity and hysteresis settings

- Wide operating voltage range: 4.0V~20V

- Output sink current up to 0.4A

- Built-in FG output

- Rotor-locked shutdown and automatically restart function

- Thermal Shutdown Protection

- -40°C to 85°C operating temperature

- Low Profile SIP-4L Package( Green and Lead Free )