M95P32-I数据手册ST中文资料规格书

描述 Description

The M95P32-I and M95P32-E are manufactured with ST's advanced proprietary NVM technology. They offer byte flexibility, page alterability, high page cycling performance, and ultra-low power consumption, equivalent to that of EEPROM technology.

The M95P32-I and M95P32-E are a 32-Mbit SPI page EEPROM device organized as 8192 programmable pages of 512 bytes each, accessed through an SPI bus with high-performance dual- and quad-SPI outputs.

The devices offer two additional (identification) 512-byte pages:

The first contains identification data and, upon request, the UID.The second can be used to store sensitive application parameters, which can (later) be permanently locked in read-only mode.Additional status, configuration and volatile registers set the desired device configuration, while the safety register provides information on the device status.

The M95P32-I operates with a supply voltage from 1.6 to 3.6 V over an ambient temperature range of -40 °C to +85 °C. The M95P32-E offers an extended range of temperature of -40°C to +105 °C. The device supports a clock frequency of up to 80 MHz.

The M95P32-I and M95P32-E offer byte and page write instructions of up to 512 bytes. Write instructions consist in self-timed auto erase and program operations, resulting in flexible data byte management.

The devices also accept page/block/sector/chip erase commands to set the memory to an erased state.

The memory can then be fast-programmed by 512-byte pages, and further optimized using the Page program with buffer load instruction to hide the SPI communication latency.

特性 Features

• Interface
•Supports serial peripheral interface (SPI) and dual/quad outputs
• High speed frequency
•Clock frequency up to 80MHz
•Fast read single/dual/quad output with one dummy byte
• Dual output data transfer up to 160Mbits/s
• Quad output data transfer up to 320Mbits/s

• 内存
•32 Mbits of page EEPROM
•64-Kbyte blocks, 4-Kbyte sectors
•Page size: 512-byte
•Two additional 512-byte identification pages
• Supply voltage
• Temperature
•Operating temperature range:
• -40 °C to +85 °C (industrial)
• -40 °C to +105 °C (extended)

• Performance
•Write endurance: 500 kcycles on full temperature range
•Data retention:
• 100 years
• 10 years after 500 kcycles
• Ultra-low power consumption
•0.6 μA (typ) in deep power-down mode
•16 μA (typ) in Standby mode
•800 μA (typ) for read single at 10 MHz
•1.5 mA (typ) for page write
•Current peak control < 3 mA
• High write erase performance
•Fast Write/Prog/Erase times:
• 2 ms (typ) for byte and page write (includes auto erase and program) for 512 bytes
• 1.2 ms (typ) for page program (512 bytes)
• 1.1 ms (typ) for page erase
• 1.3 ms (typ) for sector erase
• 4 ms (typ) for block erase
• 15 ms (typ) for chip erase

•Page program with buffer load
• Advanced features
•ECC for high memory reliability (DEC,TED)
•Schmitt trigger inputs for noise filtering
•Output buffer programmable strength
•Operating status flags for ISO26262
•Software reset
•Write protection by block, with top/bottom option
•Unique ID upon request
•Electronic identification
•Supports SFDP (serial flash discoverable parameters) mode
•JEDEC standard manufacturer identification
• 包
•ECOPACK2 (RoHS compliant) and halogen-free packages:
• DFN8 4 x 4 mm
• SO8N
• WLCSP8
• Unsawn wafer

• ESD protection
•HBM (human body model): 2000 V