M95P32-E中文资料意法半导体数据手册PDF规格书

特性 Features

SPI interface

• Supports serial peripheral interface (SPI) and dual/quad outputs

• Wide voltage range:

– VCC from 1.6 to 3.6 V

• Temperature range:

– Industrial range: -40 °C to +85 °C

– Extended range: -40 °C to +105 °C

• Fast read:

– 50 MHz read single output

描述 Description

The M95P32-I and M95P32-E are manufactured with ST's advanced proprietary NVM technology. They offer byte

flexibility, page alterability, high page cycling performance, and ultra-low power consumption, equivalent to that of

EEPROM technology.

The M95P32-I and M95P32-E are a 32-Mbit SPI page EEPROM device organized as 8192 programmable pages

of 512 bytes each, accessed through an SPI bus with high-performance dual- and quad-SPI outputs.

The device offers two additional (identification) pages of 512 bytes:

• The first contains identification data and, upon request, the UID.

• The second can be used to store sensitive application parameters, which can (later) be permanently locked

in read-only mode.

Additional status, configuration, and volatile registers set the desired device configuration, while the safety

register gives device status information.

The M95P32-I operates with a supply voltage from 1.6 to 3.6 V over an ambient temperature range of -40 °C to

+85 °C (+105 °C for the extended range). The M95P32-E offers an extended range of temperature of -40°C to

+105 °C. The device supports a clock frequency of up to 80 MHz.

The M95P32-I and M95P32-E offer byte and page write instructions of up to 512 bytes. Write instructions consist

of self-timed auto erase and program operations, resulting in flexible data byte management.

The devices also accept page/block/sector/chip erase commands in order to set the memory to an erased state.

The memory can then be fast-programmed by pages of 512 bytes, and further optimized using the page program

with buffer load to hide the SPI communication latency.

– 80 MHz fast read single/dual/quad output with one dummy byte

Memory

• 32 Mbits of page EEPROM

– 64-Kbyte blocks, 4-Kbyte sectors

– Page size: 512 bytes

– Two identification pages

• Write endurance:

– 500 kcycles on full temperature range

• Data retention:

– 100 years

– 10 years after 500 kcycles

Ultra-low power consumption

• 0.6 μA (typ) in deep power-down mode

• 16 μA (typ) in Standby mode

• 800 μA (typ) for read single at 10 MHz

• 1.5 mA (typ) for page write

• Current peak control < 3 mA

UFDFPN8

(4 x 4 mm)

SO8N

(4.9 x 6 mm)

WLCSP8

(2.608 x 1.531 mm)

Product status link

M95P32-I

M95P32-E

Ultra low-power 32-Mbit serial SPI page EEPROM with dual and quad outputs

M95P32-I M95P32-E

Datasheet

DS12964 -