M88331W-15K1T中文资料意法半导体数据手册PDF规格书

DESCRIPTION

The FLASH+PSD family of memory systems for microcontrollers (MCUs) brings In-System-Programmability (ISP) to Flash memory and programmable logic. The result is a simple and flexible solution for embedded designs. FLASH+PSD devices combine many of the peripheral functions found in MCU based applications. FLASH+PSD provides a glueless interface to most commonly-used ROMless MCUs.

■ Single Supply Voltage:

– 5 V±10 for M88xxFxY

– 3 V (+20/–10) for M88xxFxW

■ 1 or 2 Mbit of Primary Flash Memory (8 uniform sectors, 16K x 8, or 32K x 8)

■ A second non-volatile memory:

– 256 Kbit (32K x 8) EEPROM (for M8813F1x) or Flash memory (for M88x3F2x)

– 4 uniform sectors (8K x 8)

■ SRAM (16 Kbit, 2K x 8; or 64 Kbit, 8K x 8)

■ Over 3,000 Gates of PLD: DPLD and CPLD

■ 27 Reconfigurable I/O ports

■ Enhanced JTAG Serial Port

■ Programmable power management

■ Stand-by current:

– 50 µA for M88xxFxY

– 25 µA for M88xxFxW

■ High Endurance:

– 100,000 Erase/Write Cycles of Flash Memory

– 10,000 Erase/Write Cycles of EEPROM

– 1,000 Erase/Write Cycles of PLD