M74HC4851中文资料意法半导体数据手册PDF规格书

DESCRIPTION

The M74HC4851 is a single eight-channel analog MULTIPLEXER/DEMULTIPLEXER fabricated with silicon gate C2MOS technology.

It is pin to pin compatible with the equivalent to standard HC4051 and MC14051, but feature injection current effect control. This make this device especially suited for usage in automotive applications where voltages in excess of normal logic voltage are common. The injection current effect control allows signals at disabled input channels to exceed the supply voltage range or go down ground without affecting the signal of the enabled analog channel. This eliminated the need for external diode-resistor networks typically used to keep the analog channel signals within the supply voltage range. This analog switch is bidirectional and digitally controlled. It have three binary control inputs A, B, and C to select 1 of 8 to be turned on, and connected to the output, and a INH input to disable all channel.

All inputs and outputs are equipped with protection circuits against static discharge, giving them 2KV ESD immunity and transient excess voltage.

■ LOW POWER DISSIPATION:

ICC = 2µA(MAX.) at TA=25°C

■ INJECTION CURRENT PROTECTION:

V∆OUT<1mV at VCC=5V IIN≤1mA RS≤3.9KΩ

■ ON RESISTANCE at TA=25°C:

215Ω TYP. (VCC = 3.0V)

150Ω TYP. (VCC = 4.5V)

160Ω TYP. (VCC = 6V)

■ FAST SWITCHING:

tpd = 8.6ns (TYP.) at TA = 25 °C, VCC = 4.5V

■ WIDE OPERATING SUPPLY VOLTAGE

RANGE: VCC = 2V TO 6V

■ HIGH NOISE IMMUNITY:

VNIH = VNIL = 28 VCC (MIN.)

■ PIN AND FUNCTION COMPATIBLE WITH

SERIES 4051, 4851

■ LATCH-UP PERFORMANCE EXCEEDS

500mA (JESD 17)

■ ESD PERFORMANCE:

HBM > 2000V (JESD22-A114B);

MM > 200V