VOLTAGE CONTROLLED SAW OSCILLATOR

GENERAL DESCRIPTION The M675 is a VCSO (Voltage Controlled SAW Oscillator) frequency source for low-jitter clock generation. An integrated SAW (surface acoustic wave) delay line implements the high-Q VCO (voltage controlled oscillator) function, which results in low output phase noise and very

文件：111.2 Kbytes 页数：6 Pages

IDT

VOLTAGE CONTROLLED SAW OSCILLATOR

GENERAL DESCRIPTION The M675 is a VCSO (Voltage Controlled SAW Oscillator) frequency source for low-jitter clock generation. An integrated SAW (surface acoustic wave) delay line implements the high-Q VCO (voltage controlled oscillator) function, which results in low output phase noise and very

文件：257.22 Kbytes 页数：6 Pages

ICST

VOLTAGE CONTROLLED SAW OSCILLATOR

GENERAL DESCRIPTION\nThe M675 is a VCSO (Voltage Controlled SAW Oscillator) frequency source for low-jitter clock generation. An integrated SAW (surface acoustic wave) delay line implements the high-Q VCO (voltage controlled oscillator) function, which results in low output phase noise and very low ◆ Integrated SAW device\n◆ M675-01 output frequencies from 125 to 175 MHz\n  M675-02 output frequencies from 500 to 700 MHz\n  (Specify center frequency at time of order)\n◆ Industry-standard Kvco for full compatibility\n◆ Low phase jitter 0.2ps rms typical for the M675-02 (50kHz to 80MHz)\n◆ Differ;

Renesas

瑞萨

VOLTAGE CONTROLLED SAW OSCILLATOR

GENERAL DESCRIPTION The M675 is a VCSO (Voltage Controlled SAW Oscillator) frequency source for low-jitter clock generation. An integrated SAW (surface acoustic wave) delay line implements the high-Q VCO (voltage controlled oscillator) function, which results in low output phase noise and very

文件：111.2 Kbytes 页数：6 Pages

IDT

VOLTAGE CONTROLLED SAW OSCILLATOR

GENERAL DESCRIPTION The M675 is a VCSO (Voltage Controlled SAW Oscillator) frequency source for low-jitter clock generation. An integrated SAW (surface acoustic wave) delay line implements the high-Q VCO (voltage controlled oscillator) function, which results in low output phase noise and very

文件：257.22 Kbytes 页数：6 Pages

ICST

VOLTAGE CONTROLLED SAW OSCILLATOR

GENERAL DESCRIPTION The M675 is a VCSO (Voltage Controlled SAW Oscillator) frequency source for low-jitter clock generation. An integrated SAW (surface acoustic wave) delay line implements the high-Q VCO (voltage controlled oscillator) function, which results in low output phase noise and very

文件：257.22 Kbytes 页数：6 Pages

ICST