SYNC SIGNAL PROCESSOR

DESCRIPTION The M52347 automatically selects three types of synchronous signals containing separate sync (positive and negative polarities of 0.5 to 2.5 VP-P), composite sync (positive and negative polarities of 0.5 to 2.5 VP-P) and sync-on-video (sync negative polarity), and performs waveform

文件：131.79 Kbytes 页数：13 Pages

MITSUBISHI

三菱电机

SYNC SIGNAL PROCESSOR

MITSUBISHI

三菱电机

SYNC SIGNAL PROCESSOR

DESCRIPTION The M52347 automatically selects three types of synchronous signals containing separate sync (positive and negative polarities of 0.5 to 2.5 VP-P), composite sync (positive and negative polarities of 0.5 to 2.5 VP-P) and sync-on-video (sync negative polarity), and performs waveform

文件：131.79 Kbytes 页数：13 Pages

MITSUBISHI

三菱电机

SYNC SIGNAL PROCESSOR

DESCRIPTION The M52347 automatically selects three types of synchronous signals containing separate sync (positive and negative polarities of 0.5 to 2.5 VP-P), composite sync (positive and negative polarities of 0.5 to 2.5 VP-P) and sync-on-video (sync negative polarity), and performs waveform

文件：131.79 Kbytes 页数：13 Pages

MITSUBISHI

三菱电机

Sync Signal Processor

Description The M52347 automatically selects three types of synchronous signals containing separate sync (positive and negative polarities of 0.5 to 2.5 VP-P), composite sync (positive and negative polarities of 0.5 to 2.5 VP-P) and sync-on-video (sync negative polarity), and performs waveform

文件：218.3 Kbytes 页数：17 Pages

RENESAS

瑞萨

SYNC SIGNAL PROCESSOR

Description\nThe M52347 automatically selects three types of synchronous signals containing separate sync (positive and negative polarities of 0.5 to 2.5 VP-P), composite sync (positive and negative polarities of 0.5 to 2.5 VP-P) and sync-on-video (sync negative polarity), and performs waveform shap • Low power consumption with supply voltage of 5 V\n• Capable of obtaining output information on whether to input synchronous signal, and on polarity\n• Output of clamp pulse\n• Equipped with V TIME GATE SW that enables selecting whether or not VD portion pulse is output from pin 14/15.\n• Equipped ;

Renesas

瑞萨

SYNC SIGNAL PROCESSOR

DESCRIPTION\nThe M52347 automatically selects three types of synchronous signals containing separate sync (positive and negative polarities of 0.5 to 2.5 VP-P), composite sync (positive and negative polarities of 0.5 to 2.5 VP-P) and sync-on-video (sync negative polarity), and performs waveform shap • Low power consumption with supply voltage of 5V\n• Capable of obtaining output information on whether to input synchronous signal, and on polarity\n• Output of clamp pulse\n• Equipped with V TIME GATE SW that enables selecting whether or not VD portion pulse is output from pin / .\n• Equipped with;

MITSUBISHI

三菱电机