M35080-MN6T中文资料意法半导体数据手册PDF规格书

DESCRIPTION

The M35080 device consists of 1024x8 bits of low power EEPROM, fabricated with STMicroelectronics’ proprietary High Endurance Double Polysilicon CMOS technology.

The device is accessed by a simple SPI-compatible serial interface. The bus signals consist of a serial clock input (C), a serial data input (D) and a serial data output (Q), as shown in Table 1.

The device is selected when the chip select input (S) is held low. Data is clocked in during the low to high transition of the clock, C. Data is clocked out during the high to low transition of the clock.

■ Compatible with SPI Bus Serial Interface

(Positive Clock SPI Modes)

■ Single Supply Voltage: 4.5 V to 5.5 V

■ 5 MHz Clock Rate (maximum)

■ Sixteen 16-bit Incremental Registers

■ BYTE and PAGE WRITE (up to 32 Bytes)

(except for the Incremental Registers)

■ Self-Timed Programming Cycle

■ Hardware Protection of the Status Register

■ Resizeable Read-Only EEPROM Area

■ Enhanced ESD Protection

■ 1 Million Erase/Write Cycles (minimum)

■ 40 Year Data Retention (minimum)