M25P128-VME6P中文资料意法半导体数据手册PDF规格书

Summary description

The M25P128 is a 128 Mbit (16 Mbit × 8), multilevel Serial Flash memory, with advanced write protection mechanisms, accessed by a high speed SPI-compatible bus.

The memory can be programmed 1 to 256 bytes at a time, using the Page Program instruction.

The memory is organized as 64 sectors, each containing 1024 pages. Each page is 256 bytes wide. Thus, the whole memory can be viewed as consisting of 65536 pages, or 16777216 bytes.

An enhanced Fast Program/Erase mode is available to speed up operations in factory

environment. The device enters this mode whenever the VPPH voltage is applied to the Write

Protect/Enhanced Program Supply Voltage pin (W/VPP).

The whole memory can be erased using the Bulk Erase instruction, or a sector at a time, using the Sector Erase instruction.

In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. ECOPACK® packages are Lead-free and RoHS compliant. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com.

Feature summary

■ 128 Mbit of Flash memory

■ 2.7 to 3.6 V single supply voltage

■ SPI bus compatible Serial interface

■ 50 MHz clock rate (maximum)

■ VPP = 9 V for fast Program/Erase mode(optional)

■ Page Program (up to 256 Bytes):

– in 2.5 ms (typical)

– in 1.2 ms (typical with VPP = 9 V)

■ Sector Erase (2 Mbit)

■ Bulk Erase (128 Mbit)

■ Electronic signature

– JEDEC standard two-byte signature(2018h)

■ More than 10000 Erase/Program cycles per sector

■ More than 20-year data retention

■ Packages

– ECOPACK® (RoHS compliant)