LED IC

文件：88.63 Kbytes 页数：1 Pages

ETCList of Unclassifed Manufacturers

未分类制造商

Pedestal Clamp 2-Input 1-Output 3-Circuit Video Switch

Outline This is a video switch IC developed for use in video cameras, with 2-input and 1-output circuits. It has pedestal clamp input, making it ideal for RGB and video signal switching. Features 1. Pedestal clamp input 2. Low current consumption 12mA typ.(VCC5V) 3. Frequency response 10MHz t

文件：108.76 Kbytes 页数：7 Pages

MITSUMI

三美

Integrated Circuit Dual, Audio Power Amplifier, 20W

Description: the NTE1389 is an audio power amplifier in a 12–Lead SIP type package specifically designed for car stereo applications. Typically, it provides 23W output power at 14.4V and 20W at 13.2V on a 4 Ohm load. This device can be used without capacitors because it incorporates the orig

文件：24.08 Kbytes 页数：3 Pages

NTE

CMOS Compatible Enable/Disable

Description The HA-1380 Seriesof quartz crystal oscillators provide enable/disable 3-state CMOS compatible signals for bus connected systems. Supplying pin 1 of the HA-1380units with a logic “1 enables its Pin 5 output. In the disabled mode, Pin 5 presents a high impedance to the load. All unit

文件：288.1 Kbytes 页数：2 Pages

NEL