1 GHz Quadrature Modulator

Description The W3011 1 GHz Quadrature Modulator is a monolithic integrated circuit that provides direct modulation of an RF carrier by I & Q baseband inputs. It is particularly suited for use in mobile and handheld cellular telephones designed to the IS-136 (North American 824 MHz to 849 MHz

文件：199.45 Kbytes 页数：12 Pages

AGERE

1 GHz Quadrature Modulator

Description\nThe W3011 1 GHz Quadrature Modulator is a monolithic integrated circuit that provides direct modulation of an RF carrier by I & Q baseband inputs. It is particularly suited for use in mobile and handheld cellular telephones designed to the IS-136 (North American 824 MHz to 849 MHz), PDC ■ Guaranteed performance at 2.7 V power supply\n■ Output power of 3 dBm into 50 W load (single ended) with 3 V operation\n■ Direct RF modulation with or without offset mixer\n■ Automatic power control (APC) capability\n■ Accurate 90° phase shifter for carrier\n■ Double-balanced active mixers minimiz;

Broadcom

博通

1.2V to 5.5V, 짹15kV ESD-Protected, 0.1UA, 35Mbps, 8-Channel Level Translators

General Description The MAX3000E/MAX3001E/MAX3002–MAX3012 8-channel level translators provide the level shifting necessary to allow data transfer in a multivoltage system. Externally applied voltages, VCC and VL, set the logic levels on either side of the device. Logic signals present on the VL s

文件：430.22 Kbytes 页数：24 Pages

MAXIM

美信

1.2V to 5.5V, ±15kV ESD-Protected, 0.1μA,35Mbps, 8-Channel Level Translators

文件：216.57 Kbytes 页数：25 Pages

MAXIM

美信

1.2V to 5.5V, 짹15kV ESD-Protected, 0.1UA, 35Mbps, 8-Channel Level Translators

General Description The MAX3000E/MAX3001E/MAX3002–MAX3012 8-channel level translators provide the level shifting necessary to allow data transfer in a multivoltage system. Externally applied voltages, VCC and VL, set the logic levels on either side of the device. Logic signals present on the VL s

文件：430.22 Kbytes 页数：24 Pages

MAXIM

美信