Phase Frequency Detector

Description The LUCDA4044 consists of two digital phase detectors, a charge pump, and an amplifier. In combination with a voltage-controlled multivibrator, this device is useful in a broad range of phase-locked loop (PLL) applications. The circuit accepts TTL waveforms at the R and V inputs and g

文件：210.33 Kbytes 页数：6 Pages

agere

Phase Frequency Detector

Description The LUCDA4044 consists of two digital phase detectors, a charge pump, and an amplifier. In combination with a voltage-controlled multivibrator, this device is useful in a broad range of phase-locked loop (PLL) applications. The circuit accepts TTL waveforms at the R and V inputs and g

文件：210.33 Kbytes 页数：6 Pages

agere

Phase Frequency Detector

Broadcom

博通

Phase Frequency Detector

Description The LUCDA4044 consists of two digital phase detectors, a charge pump, and an amplifier. In combination with a voltage-controlled multivibrator, this device is useful in a broad range of phase-locked loop (PLL) applications. The circuit accepts TTL waveforms at the R and V inputs and g

文件：210.33 Kbytes 页数：6 Pages

agere

Single/Dual/Quad, Low-Cost, SOT23, Micropower Rail-to-Rail I/O Op Amps

General Description The MAX4040–MAX4044 family of micropower op amps operates from a single +2.4V to +5.5V supply or dual ±1.2V to ±2.75V supplies and have Rail-to-Rail® input and output capabilities. These amplifiers provide a 90kHz gain-bandwidth product while using only 10µA of supply current

文件：199.46 Kbytes 页数：16 Pages

Maxim

美信

Single/Dual/Quad, Low-Cost, SOT23, Micropower Rail-to-Rail I/O Op Amps

General Description The MAX4040–MAX4044 family of micropower op amps operates from a single +2.4V to +5.5V supply or dual ±1.2V to ±2.75V supplies and have Rail-to-Rail® input and output capabilities. These amplifiers provide a 90kHz gain-bandwidth product while using only 10µA of supply current

文件：199.46 Kbytes 页数：16 Pages

Maxim

美信