LTM2893隔离器的数字隔离器规格书PDF中文资料

LTM2893属于隔离器的数字隔离器。由亚德诺半导体技术有限公司制造生产的LTM2893数字隔离器数字隔离器用于在电气上隔离电路，但仍允许电路之间传输数字信号。技术类型包括容性耦合式、巨磁阻 (GMR) 式或磁耦合式。??通道数范围为 1 至 10 个，通道类型可以是双向、单向或二者组合。

DESCRIPTION

The LTM®2810 is a complete galvanic digital μModule®

(micromodule) isolator. No external components are

required. Individual 3V to 5.5V supplies power each side

of the digital isolator. Separate logic supply pins allow

easy interfacing with different logic levels from 1.62V to

5.5V, independent of the main supply.

Module options are available with compatibility to SPI

(LTM2810-S) and I2C (LTM2810-I), master mode only,

specifications.

The module includes an integrated transformer driver on

the logic side and an LDO on the isolated side to regulate

the rectified transformer output. The LDO output is nominally

5V but may be overdriven.

Coupled inductors provide 7500VRMS of isolation between

the input and output logic interface. This device is ideal for

systems with different ground potentials, allowing uninterrupted

communication through large common mode

transients faster than 50kV/μs.

FEATURES

- 6-Channel Logic Isolator: 7500VRMS for 1 Minute

- 16.2mm Creepage

- CSA (IEC/UL) Approved, File #255632

- 3V to 5.5V Supply Operation

- Transformer Driver with Integrated Isolated Side LDO

- SPI/Digital (LTM2810-S) or I2C (LTM2810-I) Options

- High Common Mode Transient Immunity: 50kV/μs

- High Speed Operation:

- 10MHz Digital Isolation

- 4MHz/8MHz SPI Isolation

- 400kHz I2C Isolation

- Operation Up to 125°C (H-Grade)

- 1.62V to 5.5V Logic Supplies for Flexible Digital Interfacing

- ±25kV ESD HBM Across the Isolation Barrier

- Maximum Continuous Working Voltage: 1kVRMS, 1.6kVDC

- Low Current Shutdown Mode (<10μA)

- 22mm × 6.25mm × 2.06mm BGA Package

APPLICATIONS

- EV/HEV Systems

- Industrial and Metering Systems

- Test and Measurement Equipment

- Medical Equipment