7.5kVRMS SPI/Digital or I2C 關Module Isolator with Transformer Driver

DESCRIPTION The LTM®2810 is a complete galvanic digital μModule® (micromodule) isolator. No external components are required. Individual 3V to 5.5V supplies power each side of the digital isolator. Separate logic supply pins allow easy interfacing with different logic levels from 1.62V to 5.

文件：1.3482 Mbytes 页数：30 Pages

AD

亚德诺

6500VRMS Isolated RS485/RS422 μModule Transceiver Power

FEATURES - RS485/RS422 Transceiver: 6500VRMS for 1 Minute - CSA (IEC/UL) Approved, File #255632 - Isolated DC Power: 5V at 200mA - No External Components Required - 20Mbps or Low EMI 250kbps Data Rate - High ESD: ±15kV HBM on Transceiver Interface - High Common Mode Transient Immunity: 50kV

文件：1.59431 Mbytes 页数：22 Pages

AD

亚德诺

I2C Slave Device Extender Over Rugged Differential Link

DESCRIPTION The LTC®4331 is a point-to-point SMBus compatible I2C slave device extender designed for operation in high noise industrial environments. Using a ±60V fault protected differential transceiver, the LTC4331 can extend an I2C/ SMBus bus, including SMBALERT and a control signal, over

文件：242.47 Kbytes 页数：26 Pages

AD

亚德诺

Isolated USB Data Transceiver

FEATURES - Isolated USB Transceiver: 7500VRMS for 1 Minute - CSA (IEC/UL) Approved, File #255632 - Reinforced Insulation - USB 2.0 Full Speed and Low Speed Compatible - Auto-Configuration of Bus Speed - 4.4V to 36V VBUS and VBUS2 Operating Range - 3.3V LDO Output Supply Signal References VL

文件：671.83 Kbytes 页数：18 Pages

AD

亚德诺

Isolated USB Transceiver with Isolated Power

FEATURES - LTM2884: 2500VRMS for 1 Minute - LTM2884(a): 3000VRMS for 1 Minute - LTM2884: UL Recognized File #E151738 - LTM2884(a): CSA Recognized File #255632 - USB 2.0 Full Speed and Low Speed Compatible - Integrated Isolated DC/DC Converter, External or Bus Powered - Auto-Configuration o

文件：1.42709 Mbytes 页数：24 Pages

AD

亚德诺

짹60V Rugged PROFIBUS RS485 Transceivers

文件：1.65321 Mbytes 页数：32 Pages

LINER

凌力尔特

SPI/Digital or I2C 關Module Isolator

文件：655.13 Kbytes 页数：38 Pages

LINER

凌力尔特

SPI / 数字或 I2C μModule 隔离器

LTM®2892 是一款完整的电流数字 µModule® (微型模块) 隔离器。其无需使用外部组件。单独的 3V 至 5.5V 电源负责为数字隔离器的每一侧供电。分离的逻辑电源引脚提供了与 1.62V 至 5.5V 不同逻辑电平的简易连接，这与主电源无关。\n\n 模块选项可提供与 SPI (LTM2892-S) 和 I2C (LTM2892-I) (仅限主控器模式) 规范的兼容性。\n\n 耦合电感器在输入和输出逻辑接口之间提供了 3500VRMS 的隔离度。该器件非常适合于那些接地环路断开的系统，可在速度高于 50kV/μs 的大共模瞬变过程中提供不间断的通信。\n\n • 6 通道逻辑隔离器：3500VRMS (持续 1 分钟)\n\n• UL-CSA 认可文档 ＃E151738\n\n• 3V 至 5.5V 电源运作\n\n• 无需外部组件\n\n• SPI / 数字 (LTM2892-S) 或 I2C (LTM2892-I) 选项\n\n• 可承受高共模瞬变：50kV/μs\n\n• 高速操作：\n• 10MHz 数字隔离\n\n• 4MHz / 8MHz SPI 隔离\n\n• 400kHz I2C 隔离\n\n\n\n\n• 可在高达 125°C 的温度下操作 (H 级)\n\n• 1.62V 至 5.5V 逻辑电源用于实现灵活的数字接口\n\n• ;

ADI

亚德诺

SPI/Digital or I2C Module Isolator

文件：649.27 Kbytes 页数：36 Pages

LINER

凌力尔特

Package：24-BBGA；包装：卷带（TR）剪切带（CT）Digi-Reel® 得捷定制卷带 类别：隔离器 数字隔离器 描述：DGTL ISOL 3500VRMS 6CH SPI 24BGA

AD

亚德诺