LTC772数据手册Linearin中文资料规格书

描述 Description

The LTC772 dual CMOS operational amplifier combines high slew rate and bandwidth, rail-to-rail input and output swing, high output drive, and excellent dc precision. The device provides 11.3V/μs of slew rate and 12MHz of bandwidth while only consuming 0.85mA of supply current per channel. This ac performance is much higher than current competitive CMOS amplifiers. The rail-to-rail input and output swing and high output drive make this device a good choice for driving the analog input or reference of analog-to-digital converters. The LTC772 also has low distortion while driving a 600Ω load for use in a wide range of systems. This amplifier has a 7.2μVPP input voltage noise and a 1pA input bias current for measurement, medical, and industrial applications.

The LTC772 op-amp is specified for single or dual power supplies of +2.3V to +6.0V. All models are specified over the extended industrial temperature range of −40℃ to +125℃. 

The LTC772 is available in Green 8-lead MSOP, TSSOP and SOIC packages. 

特性 Features

• High Slew Rate: 11.3 V/μs 
• Wide Bandwidth: 12 MHz 
• Settling Time to 0.1% with 2V Step: 0.22 μs 
• Overload Recovery Time to 0.1%: 0.31 μs 
• Low Distortion: Driving 600Ω 0.005% THD+N 
• Supply Voltage Range:  2.3 V to 6.0 V 
• Rail-to-Rail Input and Output 
– Input Voltage Range: -0.2 to +5.2 V at 5V Supply 
• Low Offset Voltage: 4.0 mV Maximum 
• Unit Gain Stable 
• Low Power: 850 μA per Amplifier Supply Current 
• Operating Temperature Range: −40℃ to +125℃ 
• ESD Rating: HBM – 4kV, CDM – 2kV

应用 Application

• Motor Phase Current Sensing 
• Photodiode Amplificatio
•  
• Audio Outputs 
• Active Filters 
• Sensor Interfaces 
• Driving A/D Converters 
• Portable Equipment 
• Battery-Powered Instrumentatio•