LTC4400数据手册RF/IF射频/中频RFID的RF功率控制器IC规格书PDF

描述 Description

The LTC®4400-1 is a SOT-23 RF power controller for fast turn-on RF power amplifiers operating in the 300MHz to 2.7GHz range. Examples include the Hitachi PF08109B, PF08122B, PF08123B, PF08107B and RF Micro Devices RF3108. For slow turn-on RF power amplifiers refer to the LTC4401-1/LTC4401-2.
RF power is controlled by driving the RF amplifier power control pin and sensing the resultant RF output power via a directional coupler or capacitive tap. The RF input voltage is peak detected using an on-chip Schottky diode. This detected voltage is compared to the DAC voltage at the PCTL pin to control the output power. The RF power amplifier is protected against high power control pin voltages.
Internal and external offsets are cancelled over temperature by an autozero control loop, allowing accurate low power programming. The shutdown feature disables the part and reduces the supply current to A dual control channel version (LTC4400-2) is also available in an 8-pin MSOP package.

特性 Features

·RF Power Amplifier Control in ThinSOT™ Package
·Internal Schottky Diode Detector with > 45dB Range
·Wide Input Frequency Range:300MHz to 2.7GHz (LTC4400-1)300MHz to 2GHz (LTC4400-2)
·Autozero Loop Cancels Offset Errors and Temperature Dependent Offsets
·Wide VCC Range: 2.7V to 6V
·Automatic Bandwidth Control Improves Low Power Ramp Response
·Allows Direct Connection to Battery
·RF Output Power Set by External DAC
·Internal Frequency Compensation
·Rail-to-Rail Power Control Output
·Power Control Signal Overvoltage Protection
·Low Operating Current: 1mA
·Low Shutdown Current: 10µA
·Two Pole PCTL Input Filtering
·Low Profile (1mm) ThinSOT (LTC4400-1) and 8-Pin MSOP (LTC4400-2) Packages

应用 Application

·GSM/GPRS Cellular Telephones
·PCS Devices
·Wireless Data Modems
·U.S. TDMA Cellular Phones

简介

LTC4400属于RF/IF射频/中频RFID的RF功率控制器IC。由制造生产的LTC4400RF 功率控制器 ICRF 功率控制 IC 器件可用于测量正在发射的信号的射频功率，并向可编程放大器或类似设备提供相应反馈信号，以保持所需的发射信号功率水平。