LTC4304数据手册集成电路（IC）的信号缓冲器、中继器、分离器规格书PDF

描述 Description

The LTC®4304 hot swappable 2-wire bus buffer allows I/O card insertion into a live backplane without corruption of the data and clock busses. When a connection is made, the LTC4304 provides bidirectional buffering, keeping the backplane and card capacitances isolated. If SDAOUT or SCLOUT is low for ≥30ms (typ), the LTC4304 automatically breaks the data and clock bus connection and FAULT will pull low. At this time the LTC4304 automatically generates up to 16 clock pulses on SCLOUT in an attempt to free the bus. A connection will be enabled automatically when the bus becomes free. A logic low on the ACC input enables the LTC4304's rise-time accelerators. A logic high on ACC disables the rise-time accelerators, which allows SDA and SCL bus pull-up voltages below VCC. During insertion, the SDA and SCL lines are precharged to 1V to minimize bus disturbances. When driven high, ENABLE allows the LTC4304 to connect after a stop bit or bus idle occurs. Driving ENABLE low breaks the connection between SDAIN and SDAOUT, SCLIN and SCLOUT. READY is an open drain output that indicates when the backplane and card sides are connected together.

*Patent Pending

Applications Hot Board Insertion Servers Capacitance Buffer/Bus Extender RAID Systems

特性 Features

• Automatic Disconnect of SDA/SCL Lines when Bus is Stuck Low for ≥30ms

• Fault Flag for Stuck Bus

• Recovers Stuck Busses with Automatic Clocking*

• Bidirectional Buffer* for SDA and SCL Lines Increases Fanout

• Prevents SDA and SCL Corruption During Live Board Insertion and Removal from Backplane

• Allows Bus Pullup Voltages Above and Below VCC

• ±15kV Human Body Model ESD Protection

• Isolates Input SDA and SCL Lines from Output

• Compatible with I2CTM, I2C Fast-Mode and SMBus Standards (Up to 400kHz Operation)

• READY Open Drain Output

• 1V Precharge on All SDA and SCL Lines

• High Impedance SDA, SCL Pins for VCC = 0V

• ENABLE Gates Connection from Input to Output

• MSOP 10-Pin and DFN (3mm × 3mm) Packages

简介

LTC4304属于集成电路（IC）的信号缓冲器、中继器、分离器。由制造生产的LTC4304信号缓冲器、中继器、分离器信号缓冲器、中继器和分离器系列中的产品适用于远距离电气互连或电缆系统的数字信息传输。所有实际互连系统都具有非理想特性，该系列产品主要用于解决数字信息传输过程中因此造成的模拟问题。此外，还有其他功能，例如不同物理接口样式之间的转换和多路复用。